---EPON MIB 版本2016-10-28 NSCRTV-FTTX-EPON-MIB DEFINITIONS ::= BEGIN IMPORTS BridgeId, Timeout FROM BRIDGE-MIB IpAddress, Unsigned32, Integer32, Counter32,OBJECT-TYPE, TimeTicks, Gauge32, Counter64, MODULE-IDENTITY, OBJECT-IDENTITY, enterprises FROM SNMPv2-SMI DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC; nscrtvRoot OBJECT IDENTIFIER ::= { enterprises 17409 } -- DESCRIPTION -- "nscrtvRoot定义全国广电设备管理MIB根节点。" nscrtvHFCemsTree OBJECT IDENTIFIER ::= { nscrtvRoot 1 } nscrtvFTTxTree OBJECT IDENTIFIER ::= { nscrtvRoot 2} -- DESCRIPTION -- "nscrtvFTTxTree定义EPON、EOC等设备管理系统的MIB根节点," -- "所有FTTx综合网络设备管理系统的MIB均应在该节点下定义" propertyIdent OBJECT IDENTIFIER ::= { nscrtvFTTxTree 1} -- DESCRIPTION -- "属性(Property)MIB的分支节点标识。" alarmsIdent OBJECT IDENTIFIER ::= { nscrtvFTTxTree 2} -- DESCRIPTION -- "告警(Alarms)MIB的分支节点标识。" eponTree OBJECT IDENTIFIER ::= { nscrtvFTTxTree 3} -- DESCRIPTION -- "EPON MIB的分支节点标识。" eoCTree OBJECT IDENTIFIER ::= { nscrtvFTTxTree 4} -- DESCRIPTION -- "EoC MIB的分支节点标识。" orTree OBJECT IDENTIFIER ::= { nscrtvFTTxTree 5} -- DESCRIPTION -- "OpticalReceiver MIB的分支节点标识。" eponOnuWifiObject OBJECT IDENTIFIER ::= { nscrtvFTTxTree 9} eponAlarmTree OBJECT IDENTIFIER ::= { alarmsIdent 11 } eponTrapObjectGroup OBJECT IDENTIFIER ::= { eponAlarmTree 1 } eponAlarmObjGroup OBJECT IDENTIFIER ::= { eponAlarmTree 2 } eponManagementObjGroup OBJECT IDENTIFIER ::= { eponAlarmTree 3 } systemObjects OBJECT IDENTIFIER ::= { eponTree 1 } sniObjects OBJECT IDENTIFIER ::= { eponTree 2 } ponPortObjects OBJECT IDENTIFIER ::= { eponTree 3 } onuObjects OBJECT IDENTIFIER ::= { eponTree 4 } uniObjects OBJECT IDENTIFIER ::= { eponTree 5 } igmpManagementObjects OBJECT IDENTIFIER ::= { eponTree 6 } vlanManagementObjects OBJECT IDENTIFIER ::= { eponTree 7 } qosManagementObjects OBJECT IDENTIFIER ::= { eponTree 8 } stpManagementObjects OBJECT IDENTIFIER ::= { eponTree 9 } performanceStatisticObjects OBJECT IDENTIFIER ::= { eponTree 10 } catvOrObjects OBJECT IDENTIFIER ::= { orTree 1 } eponWifiGroup MODULE-IDENTITY LAST-UPDATED "201606011416Z" ORGANIZATION "Organization" CONTACT-INFO "Contact-info" DESCRIPTION "Description" REVISION "201606011416Z" DESCRIPTION "Revision description" ::= { eponOnuWifiObject 1 } -- -- eponOnuWifiGroup -- eponOnuWifiGroup OBJECT IDENTIFIER ::= { eponWifiGroup 1 } EponDeviceIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Epon olt/onu设备索引号。 ONU ID的组成(4字节)(高--低) Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit Note: ---- 1. OLT device must not be 0. 2. Card here shall confirm the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. 3. Pon port must not be 0. 4. The useful ONU logical ID MUST never be set to 0, where NUM of 0 has another meaning, to indicate that the ONU logical ID is meaningless, or said to not applied. Usage guide: ----------- This TC could be used for OLT SNI, OLT PON port, OLT ONU ID OLT device, trunk. If the refered MIB object does not have clear definition, refer to the following: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum shall be set to 0, OLT SNI - Same as OLT Pon Port OLT onu ID - Set OnuNUM to corresponding ONU logical ID OLT device - Set card, pon port and OnuNUM to 0 Trunk - Card to 0x3F, pon port to trunk ID, OnuNUM to 0 Olt device to corresponding ONU device " SYNTAX Unsigned32 EponCardIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " 板卡索引号 For easy presenting the chassis view by NMS, bCardIndex shall be formatted in a following manner: Four bytes of INTEGER, from the most significant byte to the least significant bytes ----------------------------------------------------------------------------- Reserved byte Reserved byte Reserved byte Sub-slot 2-bit Main-slot 6-bit Notes: ----- 1. Reserved bytes shall be set to 0. 2. The main-slot shall be started from 1, and shall be in a consecutive manner, for all slots, including service slots, control slots, switch slots, power slots,FAN slots, etc.For example, 1, 2, 3 3. The sub-slot shall be started from 1, and shall be in a consecutive manner. For example, 1, 2. If no sub-slot concept of a main-slot, set to 0. 4. For fixed device, if no slot concept, NE shall set both main-slot and sub-slot to 0, to indicate this is meaningless. For modulized device, they MUST not be set to 0.This definition shall applied to both OLT and ONU. 5. For trunk, since there is no slot concept, set main-slot to all-1 and sub-slot to 0. This definition shall applied to both OLT and ONU. For example, 0x00 00 00 0A, represents main-slot 10, no sub-slot 0x00 00 00 42, represents main-slot 2, sub-slot 1 0x00 00 00 3F, represents a trunk " SYNTAX Unsigned32 EponPortIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Epon端口索引号 The device port number shall start from 1. Nunber 0 had specific meaning, stands for portIndex is meaningless, for the situation defined. " SYNTAX INTEGER (0..255) EponAlarmCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Alarm codes, uniquely indentifies each kind of alarm. Refer to EPON alarm definition table" SYNTAX INTEGER (1..65535) EponAlarmInstance ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Alarm instance, which define the detailed management object reported the alarm. For example, OLT device 1, slot 2, port 3 reports a port down alarm. It is represents in OCTET STRING format. 1. The first four OCTET has same definition as EponDeviceIndex TC. 2. The fifth OCTET is the slot definition of ONU, which shall have same definition as last byte definition in EponCardIndex TC. 3. The sixth OCTET is the UNI port ID of ONU, which is similar to EponPortIndex TC. 4. The seventh and eighth OCTETS are reserved and shall be set to 0 at any time, and shall be ignored by maangement system. For example, 0x01 02 03 04 05 06 00 00, represents OLT device 1, slot 2, port 3, ONU logical ID 4, slot 5 UNI port 6 of the connected ONU. " SYNTAX OCTET STRING ( SIZE (8) ) EponSeverityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " 告警严重程度" SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), info(5), clear(6) } AutoNegotiationTechAbility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Technology ability of auto negotiation. Refer to clause 30.6.1.1.5 of IEEE 802.3 2005 edition" SYNTAX BITS { tenBaseTFullDuplex(1), tenBaseTHalfDuplex(2), hundredBaseTFullDuplex(3), hundredBaseTHalfDuplex(4), thousandBaseTFullDuplex(5), thousandBaseTHalfDuplex(6), thousandBaseXFullDuplex(7), thousandBaseXHalfDuplex(8), fdxPause(9), fdxApause(10), fdxSpause(11), fdxBpause(12) } TAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " First four octets sames definition of IpAddress, stands for NMS IP address The last four octets same definition of INTEGER, stands for trap UDP port " SYNTAX OCTET STRING (SIZE (8)) EponStats15MinRecordType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "15分钟性能统计记录的索引号 索引号为0表示当前15分钟性能数据 1..96表示历史的15分钟性能,1代表最新的数据,96代表最老的数据" SYNTAX INTEGER (0..96) EponStats24HourRecordType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "24小时性能统计记录的索引号 索引号为0表示当前24小时性能数据 1..30表示历史的24小时性能, 1代表最新的数据,30代表最老的数据" SYNTAX INTEGER (0..30) EponStatsThresholdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "门限类型,见 性能量定义表 1- InOctets 2 InPkts 3 InBroadcastPkts 4 InMulticastPkts 5 InPkts64Octets 6 InPkts65to127Octets 7 InPkts128to255Octets 8 InPkts256to511Octets 9 InPkts512to1023Octets 10 InPkts1024to1518Octets 11 InPkts1519to1522Octets 12 InUndersizePkts 13 InOversizePkts 14 InFragments 15 InMpcpFrames 16 InMpcpOctets 17 InOAMFrames 18 InOAMOctets 19 InCRCErrorPkts 20 InDropEvents 21 InJabbers 22 InCollision 23 OutOctets 24 OutPkts 25 OutBroadcastPkts 26 OutMulticastPkts 27 OutPkts64Octets 28 OutPkts65to127Octets 29 OutPkts128to255Octets 30 OutPkts256to511Octets 31 OutPkts512to1023Octets 32 OutPkts1024to1518Octets 33 OutPkts1519o1522Octets 34 OutUndersizePkts 35 OutOversizePkts 36 OutFragments 37 OutMpcpFrames 38 OutMpcpOctets 39 OutOAMFrames 40 OutOAMOctets 41 OutCRCErrorPkts 42 OutDropEvents 43 OutJabbers 44 OutCollision 50 Temperature 51 Voltage 52 TXPower 53 RXPower Note: ---------------------------------------------------------------- 1. For 50 Temperature, this parameter shall only applied to a. Slot level, for each service/switch/management card, for chassis-based system. b. Node-level, for fixed box. 2. For 50 Temperature, shall be applied to both OLT and ONU 3. For 50 Temperature, since no 15-min performance data collection are required, system shall ensure the temperature polling interval no less than 5 seconds. The alarm shall be only generated when the threshold is acrossed for three continuous intervals, and shall be cleared, when the threshold is not accrossed any more, for three continous intervals. " SYNTAX INTEGER (1..1024) -------------------------------------------------------------------------------- -- systemObjects [系统属性参数管理项](1.3.6.1.4.1.17409.2.3.1) -------------------------------------------------------------------------------- systemGlobalObjects OBJECT-IDENTITY STATUS current DESCRIPTION "全局参数表" ::= { systemObjects 1 } systemTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION " 节点系统时间, 8字节的十六进制或11字节的十六进制 建议采用8字节定义,不包括时区" ::= { systemGlobalObjects 1 } inbandIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带内管理接口IP地址" ::= { systemGlobalObjects 2 } inbandIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带内管理接口IP掩码" ::= { systemGlobalObjects 3 } inbandIpGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带内管理接口网关IP地址" ::= { systemGlobalObjects 4 } inbandVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 带内管理接口VLAN ID. 带内管理VLAN的成员关系由VLAN表定义" ::= { systemGlobalObjects 5 } inbandMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带内管理接口MAC地址." ::= { systemGlobalObjects 6 } outbandIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带外管理接口IP地址" ::= { systemGlobalObjects 7 } outbandIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带外管理接口IP掩码" ::= { systemGlobalObjects 8 } outbandIpGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带外管理接口网关IP地址" ::= { systemGlobalObjects 9 } outbandMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " 带外管理接口MAC地址" ::= { systemGlobalObjects 10 } systemOUI OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-only STATUS current DESCRIPTION " 系统OUI" ::= { systemGlobalObjects 11 } vendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Vender name of the OLT equipment" ::= { systemGlobalObjects 12 } devSn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number of the OLT equipment" ::= { systemGlobalObjects 13 } saveConfig OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " Save device configuration when set value to 1." ::= { systemGlobalObjects 14 } saveConfigStatus OBJECT-TYPE SYNTAX INTEGER{ fail(0), success(1), inProcess(2), } MAX-ACCESS read-only STATUS current DESCRIPTION " Save device configuration status " ::= { systemGlobalObjects 15 } oltObjects OBJECT-IDENTITY STATUS current DESCRIPTION " OLT管理项节点" ::= { systemObjects 2 } oltPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF OltPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT属性表" ::= { oltObjects 1 } oltPropertyEntry OBJECT-TYPE SYNTAX OltPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { oltDeviceIndex } ::= { oltPropertyTable 1 } OltPropertyEntry ::= SEQUENCE { oltDeviceIndex INTEGER, oltName DisplayString, oltType DisplayString, oltAdminStatus INTEGER, oltDeviceUpTime TimeStamp, oltDeviceNumOfTotalServiceSlot INTEGER, oltDeviceNumOfTotalPowerSlot INTEGER, oltDeviceNumOfTotalFanSlot INTEGER, oltDeviceStyle INTEGER } oltDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { oltPropertyEntry 1 } oltName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " 该OLT设备的名称" ::= { oltPropertyEntry 2 } oltType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " OLT设备类型" ::= { oltPropertyEntry 3 } oltAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " OLT设备管理状态 up(1) - 设备允许提供业务 down(2) - 设备禁止提供业务 testing(3) - 设备处于测试状态,该状态下可能无法正常提供业务" ::= { oltPropertyEntry 4 } oltDeviceUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " 该OLT设备启动时长" ::= { oltPropertyEntry 5 } oltDeviceNumOfTotalServiceSlot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Total number of service slots in the OLT device, including service card, switch card, control card, uplink card, etc. but except power, FAN, regardless whether the slot is installed module" ::= { oltPropertyEntry 6 } oltDeviceNumOfTotalPowerSlot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Total number of power slots in the OLT device, regardless whether the slot is installed module" ::= { oltPropertyEntry 7 } oltDeviceNumOfTotalFanSlot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Total number of FAN slots in the OLT device, regardless whether the slot is installed module" ::= { oltPropertyEntry 8 } oltDeviceStyle OBJECT-TYPE SYNTAX INTEGER { fixed(1), chassisBased(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " The device stype of either fixed or chassis based： fixed(1) - such as pizza box chassisBased(2) - Have number of slots for installing service card, power card, etc. " ::= { oltPropertyEntry 9 } boardObjects OBJECT-IDENTITY STATUS current DESCRIPTION " 板卡管理项" ::= { systemObjects 3 } boardTable OBJECT-TYPE SYNTAX SEQUENCE OF BoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT板卡表 This table shall include rows for all slots, including the slots has a presence state of 'NotInstalled'. " ::= { boardObjects 1 } boardEntry OBJECT-TYPE SYNTAX BoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { bDeviceIndex, bCardIndex} ::= { boardTable 1 } BoardEntry ::= SEQUENCE { bDeviceIndex INTEGER, bCardIndex EponCardIndex, bType INTEGER, bAttribute INTEGER, bOperationStatus INTEGER, bAdminStatus INTEGER, bHardwareVersion DisplayString, bFirmwareVersion DisplayString, bSoftwareVersion DisplayString, bUpTime TimeStamp, bAlarmStatus BITS, bSerialNumber DisplayString, bAction INTEGER, bName OCTET STRING, bPresenceStatus INTEGER } bDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { boardEntry 1 } bCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { boardEntry 2 } bType OBJECT-TYPE SYNTAX INTEGER { controlBoard(1), geponBoard(2), uplinkBoard(3), switchBoard(4), other(5), vacant(6) } MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡类型 controlBoard(1) - 主控板 geponBoard(2) - GE EPON板 uplinkBoard(3) - 上联板 switchBoard(4) - 交换板(考虑存在交换板和主控板分开的情况) other(5) - 未知类型板卡 vacant(6) - 板卡未插入 " ::= { boardEntry 3 } bAttribute OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2), standalone(3), notApplicable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡属性 - 用于描述主控卡和交换卡在主备冗余方式下的状态 active(1) - 该板卡为主用板卡 standby(2) - 该板卡为备用板卡 standalone(3) - 独立工作,用于描述OLT设备不支持主控卡和交换卡主备冗余方式 时的工作状态 notApplicable(4) - 该板卡不是主控卡和交换卡,此对象不适用于该板卡" ::= { boardEntry 4 } bOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡操作状态 up(1) - 该板卡可以提供业务 down(2) - 该板卡无法提供业务 testing(3) - 该板卡处于测试状态,该状态下可能无法正常提供业务" ::= { boardEntry 5 } bAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 板卡管理状态 up(1) - 该板卡允许提供业务 down(2) - 该板卡禁止提供业务 testing(3) - 该板卡处于测试状态,该状态下可能无法正常提供业务" ::= { boardEntry 6 } bHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡硬件版本" ::= { boardEntry 7 } bFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡固件版本" ::= { boardEntry 8 } bSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡软件版本" ::= { boardEntry 9 } bUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡在线时间" ::= { boardEntry 10 } bAlarmStatus OBJECT-TYPE SYNTAX BITS { critical(0), major(1), minor(2), warning(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡告警状态" ::= { boardEntry 11 } bSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡SN" ::= { boardEntry 12 } bAction OBJECT-TYPE SYNTAX INTEGER { noAction(1), switchover(2), upgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 对板卡施加的操作 noAction(1) - 表示没有任何操作,用于默认设置和其他操作完成后恢复值 switchover(2) - 主备切换,只针对主控卡和交换卡 upgrade(3) - 板卡软件升级" ::= { boardEntry 13 } bName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " The board name defined by vendor individual" ::= { boardEntry 14 } bPresenceStatus OBJECT-TYPE SYNTAX INTEGER { installed(1), notInstalled(2), others(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical presence status of the slot" ::= { boardEntry 15 } powerObjects OBJECT-IDENTITY STATUS current DESCRIPTION " 电源表模块列表" ::= { systemObjects 4 } powerPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF PowerPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 电源板属性表" ::= { powerObjects 1 } powerPropertyEntry OBJECT-TYPE SYNTAX PowerPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { powerDeviceIndex, powerCardIndex} ::= { powerPropertyTable 1 } PowerPropertyEntry ::= SEQUENCE { powerDeviceIndex INTEGER, powerCardIndex EponCardIndex, powerCardOperationStatus INTEGER, powerCardAlarmStatus BITS, powerCardAction INTEGER, powerCardName OCTET STRING, powerCardPresenceStatus INTEGER, powerCardRedundancyStatus INTEGER } powerDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { powerPropertyEntry 1 } powerCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { powerPropertyEntry 2 } powerCardOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 电源板操作状态 up(1) - 该板卡可以提供业务 down(2) - 该板卡无法提供业务 testing(3) - 该板卡处于测试状态,该状态下可能无法正常提供业务" ::= { powerPropertyEntry 3 } powerCardAlarmStatus OBJECT-TYPE SYNTAX BITS { critical(0), major(1), minor(2), warning(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 电源板告警状态" ::= { powerPropertyEntry 4 } powerCardAction OBJECT-TYPE SYNTAX INTEGER { noAction(1), switchover(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 对电源板施加的操作 noAction(1) - 表示没有任何操作,用于默认设置和其他操作完成后恢复值 switchover(2) - 主备切换,如果电源工作在主备模式 Note: Switchover(2) shall be only set to the power board with powerCardRedundancyStatus of active(1)" ::= { powerPropertyEntry 5 } powerCardName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " The power card name defined by vendor individual" ::= { powerPropertyEntry 6 } powerCardPresenceStatus OBJECT-TYPE SYNTAX INTEGER { installed(1), notInstalled(2), others(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical presence status of the power slot" ::= { powerPropertyEntry 7 } powerCardRedundancyStatus OBJECT-TYPE SYNTAX INTEGER { active(1), stanby(2), standalone(3), loadShareing(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The redundancy status of the power card： active(1) - The power card is working on redundanct active/ Standby mode and the current role is active. stanby(2) - The power card is working on redundanct active/ Standby mode and the current role is standby. standalone(3) - The power card is not working on redundanct mode and the current role is standalone. loadShareing(4) - The power card is working on redundanct loadsharing mode. " ::= { powerPropertyEntry 8 } fanObjects OBJECT-IDENTITY STATUS current DESCRIPTION " 风扇表" ::= { systemObjects 5 } fanPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF FanPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 风扇属性表" ::= { fanObjects 1 } fanPropertyEntry OBJECT-TYPE SYNTAX FanPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { fanDeviceIndex, fanCardIndex} ::= { fanPropertyTable 1 } FanPropertyEntry ::= SEQUENCE { fanDeviceIndex INTEGER, fanCardIndex EponCardIndex, fanCardOperationStatus INTEGER, fanCardAlarmStatus BITS, fanCardName OCTET STRING, fanCardPresenceStatus INTEGER } fanDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { fanPropertyEntry 1 } fanCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { fanPropertyEntry 2 } fanCardOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 风扇板操作状态 up(1) - 该板卡可以提供业务 down(2) - 该板卡无法提供业务 testing(3) - 该板卡处于测试状态,该状态下可能无法正常提供业务" ::= { fanPropertyEntry 3 } fanCardAlarmStatus OBJECT-TYPE SYNTAX BITS { critical(0), major(1), minor(2), warning(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 风扇板告警状态" ::= { fanPropertyEntry 4 } fanCardName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " The FAN card name defined by vendor individual" ::= { fanPropertyEntry 5 } fanCardPresenceStatus OBJECT-TYPE SYNTAX INTEGER { installed(1), notInstalled(2), others(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical presence status of the FAN card slot" ::= { fanPropertyEntry 6 } fileTransferManagement OBJECT-IDENTITY STATUS current DESCRIPTION " 文件传输节点" ::= { systemObjects 6 } fileTransferTable OBJECT-TYPE SYNTAX SEQUENCE OF FileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 文件传输进程表" ::= { fileTransferManagement 1 } fileTransferEntry OBJECT-TYPE SYNTAX FileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { fileTransferIndex } ::= { fileTransferTable 1 } FileTransferEntry ::= SEQUENCE { fileTransferIndex INTEGER, fileTransferProtocolType INTEGER, serverIpAddress IpAddress, ftpUserName DisplayString, ftpUserPassword DisplayString, transferFileSrcNamePath DisplayString, transferFileDstNamePath DisplayString, transferAction INTEGER, transferStatus INTEGER } fileTransferIndex OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION " 文件传送进程流水号" ::= { fileTransferEntry 1 } fileTransferProtocolType OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程使用的文件传输协议类型" ::= { fileTransferEntry 2 } serverIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程使用的服务器IP地址" ::= { fileTransferEntry 3 } ftpUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程使用的用户名,仅适用于FTP协议" ::= { fileTransferEntry 4 } ftpUserPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程使用的密码,仅适用于FTP协议" ::= { fileTransferEntry 5 } transferFileSrcNamePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程对应的文件源名称路径,比如‘/tftproot/file/image.bin" ::= { fileTransferEntry 6 } transferFileDstNamePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程对应的文件目的名称路径,比如‘/tftproot/file/image.bin" ::= { fileTransferEntry 7 } transferAction OBJECT-TYPE SYNTAX INTEGER { noOperation(1), put(2), get(3), halt(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 该进程对应的文件传输动作 noOperation(1) - 表示没有任何传输操作,用于默认设置和其他操作完成后恢复值 put(2) - 上传文件 get(3) - 下载文件 halt(4) - 停止文件传送" ::= { fileTransferEntry 8 } transferStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), inProgress(2), success(3), failure(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " 该进程对应的文件传输状态 idle(1) - 空闲 inProgress(2) - 正在传送中 success(3) - 传送成功 failure(4) - 传送失败" ::= { fileTransferEntry 9 } fileInfoManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF FileInfoManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " It is done by file list per directionary. Please walk filePath for the file lists in the specified path. If leave it NULL or walk fileInfoManagementEntry, the file list of the root directionary shall be returned " ::= { fileTransferManagement 2 } fileInfoManagementEntry OBJECT-TYPE SYNTAX FileInfoManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { filePath, fileName } ::= { fileInfoManagementTable 1 } FileInfoManagementEntry ::= SEQUENCE { filePath DisplayString, fileName DisplayString, fileSize Counter32, fileModifyTime DateAndTime, fileManagementAction INTEGER, fileAttribute INTEGER } filePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION " File path It shall be started with a length octet, followed with path string. The length octet shall indicate the number of character octets, excluding length itself. For example, 0x05 41 42 43 44 45, respresents ABCDE It shall be ended with '/', which is used to distinguish the two DisplayString indexes. For example, if the path is flash/root, filePath shall be set to flash/root/. " ::= { fileInfoManagementEntry 1 } fileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION " File name. MUST not include '/' character and MUST not be NULL. It shall be started with a length octet, followed with name string. The length octet shall indicate the number of character octets, excluding length itself. For example, 0x05 41 42 43 44 45, respresents ABCDE " ::= { fileInfoManagementEntry 2 } fileSize OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION " 文件大小,以字节为单位" ::= { fileInfoManagementEntry 3 } fileModifyTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " 文件修改时间" ::= { fileInfoManagementEntry 4 } fileManagementAction OBJECT-TYPE SYNTAX INTEGER { noOperation(1), erase(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 对文件施加的动作 noOperation(1) - 表示没有任何传输操作,用于默认设置和其他操作完成后恢复值 erase(2) - 文件删除" ::= { fileInfoManagementEntry 5 } fileAttribute OBJECT-TYPE SYNTAX INTEGER { file(1), -- It is a file dir(2) -- It is a directionary } MAX-ACCESS read-only STATUS current DESCRIPTION " The attribute of the file" ::= { fileInfoManagementEntry 6 } --ONU批处理升级表 onuBatchUpgradeTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuBatchUpgradeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ONU批处理升级表,具体实现流程见附录A.1 " ::= { systemObjects 7 } onuBatchUpgradeEntry OBJECT-TYPE SYNTAX OnuBatchUpgradeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { onuBatchUpgradeIndex } ::= { onuBatchUpgradeTable 1 } OnuBatchUpgradeEntry ::= SEQUENCE { onuBatchUpgradeIndex INTEGER, onuBatchUpgradeOnuList OCTET STRING, onuBatchUpgradeAction INTEGER, onuBatchUpgradeStatus OCTET STRING, onuBatchUpgradeImageName DisplayString } onuBatchUpgradeIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION " onu升级操作索引,OLT厂商根据OLT对ONU升级的并行能力,建立一定数量的升级操作项,至少为1,不强制要求并行升级多类型ONU,允许串行方式执行" ::= { onuBatchUpgradeEntry 1 } onuBatchUpgradeOnuList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Onu列表,每4byte表示一个onu(参照EponDeviceIndex),长度为4 * (onu个数),最大长度是4*256" ::= { onuBatchUpgradeEntry 2 } onuBatchUpgradeAction OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "写入任意值触发升级" ::= { onuBatchUpgradeEntry 3 } onuBatchUpgradeStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Onu列表,每2byte表示一个onu的升级状态,长度为2 * (onu个数),同当前升级任务的onulist一一对应 状态码说明： 1：Idle 2：Waiting 3：InProgress 4：Success 5：Failure(不确定原因的错误) 6：OnuTypeNotConsistent(Onu类型不一致) 7：FileDownloadFail(下载镜像失败,包括OLT内部板卡间传输失败或者文件前置校验失败) 8：OnuNotExist(Onu掉线或者别的导致Onuid失效的情况) 9：NotConsistent(Onu同升级文件不匹配) 10：OnuCommunicationFail(Onu通信失败) " ::= { onuBatchUpgradeEntry 4 } onuBatchUpgradeImageName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "写入用于升级的ONU镜像文件名" ::= { onuBatchUpgradeEntry 5 } -------------------------------------------------------------------------------- -- sniObjects [OLT上联端口属性管理项](1.3.6.1.4.1.17409.2.3.2) -------------------------------------------------------------------------------- sniAttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF SniAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of sniAttributeTable entries. " ::= {sniObjects 1 } sniAttributeEntry OBJECT-TYPE SYNTAX SniAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sniAttributeEntry Information" INDEX { sniAttributeDeviceIndex, sniAttributeCardIndex,sniAttributePortIndex } ::={sniAttributeTable 1 } SniAttributeEntry ::= SEQUENCE { sniAttributeDeviceIndex INTEGER, sniAttributeCardIndex EponCardIndex, sniAttributePortIndex EponPortIndex, sniPortName DisplayString, sniAdminStatus INTEGER, sniOperationStatus INTEGER, sniMediaType INTEGER, sniAutoNegotiationStatus INTEGER, sniAutoNegotiationMode INTEGER, sniPerfStats15minuteEnable TruthValue, sniPerfStats24hourEnable TruthValue, sniLastStatusChangeTime TimeTicks, sniMacAddrLearnMaxNum INTEGER, sniIsolationEnable TruthValue, sniPortType INTEGER, } sniAttributeDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Device Index" ::= {sniAttributeEntry 1 } sniAttributeCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Card Index" ::= {sniAttributeEntry 2 } sniAttributePortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Index" ::= {sniAttributeEntry 3 } sniPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Port Name" ::= {sniAttributeEntry 4 } sniAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin Status" ::= {sniAttributeEntry 5 } sniOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operation Status" ::= {sniAttributeEntry 6 } sniMediaType OBJECT-TYPE SYNTAX INTEGER { twistedPair(1), fiber(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Media Type" ::= {sniAttributeEntry 7 } sniAutoNegotiationStatus OBJECT-TYPE SYNTAX INTEGER { auto-negotiate(1), half-10(2), full-10(3), half-100(4), full-100(5), full-1000(6), full-10000(7), unknown(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Auto Negotiation Status" ::= {sniAttributeEntry 8 } sniAutoNegotiationMode OBJECT-TYPE SYNTAX INTEGER { auto-negotiate(1), half-10(2), full-10(3), half-100(4), full-100(5), full-1000(6), full-10000(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto Negotiation Mode" ::= {sniAttributeEntry 9 } sniPerfStats15minuteEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) false(2)" ::= {sniAttributeEntry 10 } sniPerfStats24hourEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) false(2)" ::= {sniAttributeEntry 11 } sniLastStatusChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Last Change Time" ::= {sniAttributeEntry 12 } sniMacAddrLearnMaxNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Number of MAC address limited on the SNI port. value 0 means no limit. 入口方向" ::= {sniAttributeEntry 13 } sniIsolationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not isolate the SNI port to other ports" ::= {sniAttributeEntry 14 } sniPortType OBJECT-TYPE SYNTAX INTEGER{ ge-Port(1), ten-Ge-Port(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " SNI port type, Ge-Port, 10Ge-Port" ::= {sniAttributeEntry 15 } sniTrunkManagement OBJECT-IDENTITY STATUS current DESCRIPTION "" ::= { sniObjects 2 } sniTrunkGroupConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SniTrunkGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of sniTrunkGroupConfigTable entries." ::= {sniTrunkManagement 1 } sniTrunkGroupConfigEntry OBJECT-TYPE SYNTAX SniTrunkGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sniTrunk Group Config Entry Information" INDEX { sniTrunkGroupConfigIndex } ::={sniTrunkGroupConfigTable 1 } SniTrunkGroupConfigEntry ::= SEQUENCE { sniTrunkGroupConfigIndex INTEGER, sniTrunkGroupConfigName DisplayString, sniTrunkGroupConfigMember OCTET STRING, sniTrunkGroupConfigPolicy INTEGER, sniTrunkGroupConfigRowstatus RowStatus } sniTrunkGroupConfigIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group Config Index" ::= {sniTrunkGroupConfigEntry 1 } sniTrunkGroupConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Config Name" ::= {sniTrunkGroupConfigEntry 2 } sniTrunkGroupConfigMember OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Config Member. It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the trunk group. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports of the trunk, then sniTrunkGroupConfigMember is presented as: 01 01 02 00 01 02 03 00 " ::= {sniTrunkGroupConfigEntry 3 } sniTrunkGroupConfigPolicy OBJECT-TYPE SYNTAX INTEGER { srcMac(1), destMac(2), srcMacNDestMac(3), srcIp(4), destIp(5), srcIpNDestIp(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Config Policy" ::= {sniTrunkGroupConfigEntry 4 } sniTrunkGroupConfigRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Trunk Group Config Rowstatus" ::= {sniTrunkGroupConfigEntry 5 } sniTrunkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SniTrunkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a list of sniTrunkGroupConfigTable entries. " ::= {sniTrunkManagement 2 } sniTrunkGroupEntry OBJECT-TYPE SYNTAX SniTrunkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group Entry" INDEX { sniTrunkGroupIndex } ::={sniTrunkGroupTable 1 } SniTrunkGroupEntry ::= SEQUENCE { sniTrunkGroupIndex INTEGER, sniTrunkGroupOperationStatus INTEGER, sniTrunkGroupActualSpeed INTEGER, sniTrunkGroupAdminStatus INTEGER } sniTrunkGroupIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk Group Index " ::= {sniTrunkGroupEntry 1 } sniTrunkGroupOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Trunk Group Operation Status" ::= {sniTrunkGroupEntry 2 } sniTrunkGroupActualSpeed OBJECT-TYPE SYNTAX INTEGER UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Trunk Group Actual Speed. The speed is the aggregated rates of all operational UP member ports of the trunk. For example, 4 member ports of the trunk, two are UP, each is 1000M then the SUN is 2000M. As a result, the return of the MIB shall be 2000Mbps" ::= {sniTrunkGroupEntry 3 } sniTrunkGroupAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trunk Group AdminStatus" ::= {sniTrunkGroupEntry 4 } sniMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF SniMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a list of sniMirrorTable entries." ::= {sniObjects 3 } sniMirrorEntry OBJECT-TYPE SYNTAX SniMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mirror Information." INDEX { sniMirrorGroupIndex } ::={sniMirrorTable 1 } SniMirrorEntry ::= SEQUENCE { sniMirrorGroupIndex INTEGER, sniMirrorGroupName DisplayString, sniMirrorGroupDstPortList OCTET STRING, sniMirrorGroupSrcInPortList OCTET STRING, sniMirrorGroupSrcOutPortList OCTET STRING, sniMirrorGroupRowstatus RowStatus } sniMirrorGroupIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mirror Group Index" ::= {sniMirrorEntry 1 } sniMirrorGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror Group Name" ::= {sniMirrorEntry 2 } sniMirrorGroupDstPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror Group Dst Port List. It is presented by destination port list. Each port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of destination ports in this mirror instance. The relationship is: Length of the string = 4 * (NUM of ports) For example, if device 1, port 2/3 is the destination port of the mirror instance, then object will be presented as: 01 02 03 00 " ::= {sniMirrorEntry 3 } sniMirrorGroupSrcInPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror Group Src In Port List. It will includes the PON ports. It is presented by source ingress port list. Each port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of source ingress ports in this mirror instance. The relationship is: Length of the string = 4 * (NUM of ports) For example, if device 1, port 2/3, device 6, port 7/8 is the source ingress port of the mirror instance, then object will be presented as: 01 02 03 00 06 07 08 00 " ::= {sniMirrorEntry 4 } sniMirrorGroupSrcOutPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror Group Src Out Port List. It will includes the PON ports. It is presented by source egress port list. Each port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of source egress ports in this mirror instance. The relationship is: Length of the string = 4 * (NUM of ports) For example, if device 1, port 2/3, device 6, port 7/8 is the source egress port of the mirror instance, then object will be presented as: 01 02 03 00 06 07 08 00 " ::= {sniMirrorEntry 5 } sniMirrorGroupRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror Group Rowstatus" ::= {sniMirrorEntry 6 } sniMacAddressManagement OBJECT-IDENTITY STATUS current DESCRIPTION "" ::= { sniObjects 4 } sniMacAddressManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF SniMacAddressManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A list of MacAddressManagement entries. " ::= { sniMacAddressManagement 1 } sniMacAddressManagementEntry OBJECT-TYPE SYNTAX SniMacAddressManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mac Address Management Information" INDEX { sniMacAddressManagementDeviceIndex } ::= { sniMacAddressManagementTable 1 } SniMacAddressManagementEntry ::= SEQUENCE { sniMacAddressManagementDeviceIndex INTEGER, sniMacAddrTableAgingTime INTEGER, sniMacAddrTableClear INTEGER } sniMacAddressManagementDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "device Index" ::= { sniMacAddressManagementEntry 1 } sniMacAddrTableAgingTime OBJECT-TYPE SYNTAX INTEGER UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Mac Address Table Aging Time" ::= { sniMacAddressManagementEntry 2 } sniMacAddrTableClear OBJECT-TYPE SYNTAX INTEGER { allDynamic(1),allStatic(2),allBlackhole(3),all(4),none(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Mac Address Table Clear" ::= { sniMacAddressManagementEntry 3 } sniMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SniMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MacAddress entries." ::= { sniMacAddressManagement 2 } sniMacAddressEntry OBJECT-TYPE SYNTAX SniMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNI端口学习到的MAC地址列表 " INDEX { sniMacAddrIndex, sniMacAddrVlanIdIndex } ::= { sniMacAddressTable 1 } SniMacAddressEntry ::= SEQUENCE { sniMacAddrIndex MacAddress, sniMacAddrVlanIdIndex INTEGER, sniMacAddrType INTEGER, sniMacAddrPortId EponDeviceIndex, sniMacAddrRowStatus RowStatus } sniMacAddrIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac Address Index" ::= { sniMacAddressEntry 1 } sniMacAddrVlanIdIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac Address Vlan Id Index" ::= { sniMacAddressEntry 2 } sniMacAddrType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2), blackhole(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Mac Address Type" ::= { sniMacAddressEntry 3} sniMacAddrPortId OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Mac Address Port Id" ::= { sniMacAddressEntry 4 } sniMacAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "delete,create,Update" ::= { sniMacAddressEntry 5 } sniBroadcastStormSuppressionTable OBJECT-TYPE SYNTAX SEQUENCE OF SniBroadcastStormSuppressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of BroadcastStormSuppression entries." ::= { sniObjects 5 } sniBroadcastStormSuppressionEntry OBJECT-TYPE SYNTAX SniBroadcastStormSuppressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Broadcast Storm Suppression Information" INDEX { sniBroadcastStormSuppressionDeviceIndex, sniBroadcastStormSuppressionCardIndex, sniBroadcastStormSuppressionPortIndex } ::= { sniBroadcastStormSuppressionTable 1 } SniBroadcastStormSuppressionEntry ::= SEQUENCE { sniBroadcastStormSuppressionDeviceIndex INTEGER, sniBroadcastStormSuppressionCardIndex EponCardIndex, sniBroadcastStormSuppressionPortIndex EponPortIndex, sniUnicastStormEnable TruthValue, sniUnicastStormInPacketRate INTEGER, sniUnicastStormOutPacketRate INTEGER, sniMulticastStormEnable TruthValue, sniMulticastStormInPacketRate INTEGER, sniMulticastStormOutPacketRate INTEGER, sniBroadcastStormEnable TruthValue, sniBroadcastStormInPacketRate INTEGER, sniBroadcastStormOutPacketRate INTEGER } sniBroadcastStormSuppressionDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "device Index" ::= { sniBroadcastStormSuppressionEntry 1 } sniBroadcastStormSuppressionCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "card Index" ::= { sniBroadcastStormSuppressionEntry 2 } sniBroadcastStormSuppressionPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "port Index" ::= { sniBroadcastStormSuppressionEntry 3 } sniUnicastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Cast Storm Enable" ::= { sniBroadcastStormSuppressionEntry 4 } sniUnicastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Cast Storm In Packet Rate" ::= { sniBroadcastStormSuppressionEntry 5 } sniUnicastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Cast Storm Out Packet Rate" ::= { sniBroadcastStormSuppressionEntry 6 } sniMulticastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) false(2)" ::= { sniBroadcastStormSuppressionEntry 7 } sniMulticastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast Storm In Packet Rate" ::= { sniBroadcastStormSuppressionEntry 8 } sniMulticastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast Storm Out Packet Rate" ::= { sniBroadcastStormSuppressionEntry 9 } sniBroadcastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) false(2)" ::= { sniBroadcastStormSuppressionEntry 10 } sniBroadcastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast Storm In Packet Rate" ::= { sniBroadcastStormSuppressionEntry 11 } sniBroadcastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast Storm Out Packet Rate" ::= { sniBroadcastStormSuppressionEntry 12 } -------------------------------------------------------------------------------- -- ponPortObjects[PON端口属性管理项](1.3.6.1.4.1.17409.2.3.3) -------------------------------------------------------------------------------- ponPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF PonPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PON端口配置信息表" ::= { ponPortObjects 1 } ponPortInfoEntry OBJECT-TYPE SYNTAX PonPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ponDeviceIndex, ponCardIndex, ponPortIndex} ::= { ponPortInfoTable 1 } PonPortInfoEntry ::= SEQUENCE { ponDeviceIndex INTEGER, ponCardIndex EponCardIndex, ponPortIndex EponPortIndex, ponPortType INTEGER, ponOperationStatus INTEGER, ponPortAdminStatus INTEGER, ponPortMaxOnuNumSupport INTEGER, ponPortUpOnuNum INTEGER, ponPortEncryptMode INTEGER, ponPortEncryptKeyExchangeTime INTEGER, ponPortIsolationEnable TruthValue, maxDsBandwidth INTEGER, actualDsBandwidthInUse INTEGER, remainDsBandwidth INTEGER, perfStats15minuteEnable TruthValue, perfStats24hourEnable TruthValue, ponPortMacAddrLearnMaxNum INTEGER, maxUsBandwidth INTEGER, actualUsBandwidthInUse INTEGER, remainUsBandwidth INTEGER, ponPortName DisplayString, onuLongEmitDetectEnable INTEGER } ponDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { ponPortInfoEntry 1 } ponCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { ponPortInfoEntry 2 } ponPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口索引号" ::= { ponPortInfoEntry 3 } ponPortType OBJECT-TYPE SYNTAX INTEGER { ge-epon(1), tenge-epon(2), gpon(3), other(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " PON端口类型" ::= { ponPortInfoEntry 4 } ponOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 端口操作状态 up(1) - 该端口可以提供业务 down(2) - 该端口无法提供业务 testing(3) - 该端口处于测试状态,该状态下可能无法正常提供业务" ::= { ponPortInfoEntry 5 } ponPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 板卡管理状态 enable (1) - 该端口允许提供业务 disable (2) - 该端口禁止提供业务" ::= { ponPortInfoEntry 6 } ponPortMaxOnuNumSupport OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 支持最多ONU数量" ::= { ponPortInfoEntry 7 } ponPortUpOnuNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 在线ONU数量" ::= { ponPortInfoEntry 8 } ponPortEncryptMode OBJECT-TYPE SYNTAX INTEGER { aes128(1), ctcTripleChurning(2), other(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 加密模式" ::= { ponPortInfoEntry 9 } ponPortEncryptKeyExchangeTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " 密钥交换时间" ::= { ponPortInfoEntry 10 } ponPortIsolationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " PON端口隔离使能" ::= { ponPortInfoEntry 11 } maxDsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 最大下行带宽" ::= { ponPortInfoEntry 12 } actualDsBandwidthInUse OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 实际下行使用带宽" ::= { ponPortInfoEntry 13 } remainDsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 剩余下行使用带宽" ::= { ponPortInfoEntry 14 } perfStats15minuteEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 15分钟性能统计使能" ::= { ponPortInfoEntry 15 } perfStats24hourEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 24小时性能统计使能" ::= { ponPortInfoEntry 16 } ponPortMacAddrLearnMaxNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " PON口mac地址学习最大数目 value 0 means no limit 入口方向(可选)" ::= { ponPortInfoEntry 17 } maxUsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 最大上行带宽" ::= { ponPortInfoEntry 18 } actualUsBandwidthInUse OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 实际上行使用带宽" ::= { ponPortInfoEntry 19 } remainUsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 剩余上行使用带宽" ::= { ponPortInfoEntry 20 } ponPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " PON port name." ::= { ponPortInfoEntry 21 } onuLongEmitDetectEnable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "基于PON口的ONU长发光告警使能 检测开关,0：关闭；1：打开" ::= { ponPortInfoEntry 22 } aclManagementGroup OBJECT-IDENTITY STATUS current DESCRIPTION " ACL管理" ::= { ponPortObjects 2 } -- ACL管理三张表的实现顺序(1\2\3) aclListTable OBJECT-TYPE SYNTAX SEQUENCE OF AclListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL列表" ::= { aclManagementGroup 1 } aclListEntry OBJECT-TYPE SYNTAX AclListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aclListIndex } ::= { aclListTable 1 } AclListEntry ::= SEQUENCE { aclListIndex INTEGER, aclDescription DisplayString, ruleRowStatus RowStatus } aclListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL表索引" ::= { aclListEntry 1 } aclDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION " ACL描述信息" ::= { aclListEntry 2 } ruleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 规则行状态" ::= { aclListEntry 3 } aclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL规则表" ::= { aclManagementGroup 2 } aclRuleEntry OBJECT-TYPE SYNTAX AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aclRuleListIndex,aclRuleIndex } ::= { aclRuleTable 1 } AclRuleEntry ::= SEQUENCE { aclRuleListIndex INTEGER, aclRuleIndex INTEGER, matchedSourceMac MacAddress, matchedDestinationMac MacAddress, matchedVlanId INTEGER, matchedEthernetType INTEGER, matchedSourceIP IpAddress, matchedDestinationIP IpAddress, matchedIpMessageType INTEGER, matchedDscp INTEGER, matchedSourcePort INTEGER, matchedDestinationPort INTEGER, aclRuleRowStatus RowStatus, matchedFieldSelection OCTET STRING, aclAction INTEGER, aclActionParameter OCTET STRING, matchedSourceMacMask MacAddress, matchedDestinationMacMask MacAddress, matchedSourceIPMask IpAddress, matchedDestinationIPMask IpAddress } aclRuleListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " Rule表acl list索引(基于acl列表已创建的list index)" ::= { aclRuleEntry 1 } aclRuleIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL规则索引" ::= { aclRuleEntry 2 } matchedSourceMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源Mac" ::= { aclRuleEntry 3 } matchedDestinationMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的Mac" ::= { aclRuleEntry 4 } matchedVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的vlan id" ::= { aclRuleEntry 5 } matchedEthernetType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的以太网类型 It is presented in decimal value for heximal EtherType 比如ARP(0x0806),十进制值为2054 " ::= { aclRuleEntry 6 } matchedSourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源IP" ::= { aclRuleEntry 7 } matchedDestinationIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的IP" ::= { aclRuleEntry 8 } matchedIpMessageType OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的IP报文类型" ::= { aclRuleEntry 9 } matchedDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的dscp" ::= { aclRuleEntry 10 } matchedSourcePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源端口" ::= { aclRuleEntry 11 } matchedDestinationPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的端口" ::= { aclRuleEntry 12 } aclRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 规则状态" ::= { aclRuleEntry 13 } matchedFieldSelection OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-create STATUS current DESCRIPTION " 选择的匹配域。 采用类似INTERNET比特顺序，从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0，bit1，...，bit7。 按照bit和OCTET由小到大的顺序，每个bit对应于aclRuleTable中的 一个规则，如果bit置位，表示该规则匹配，否则不匹配。 OCTET bit 目标规则 描述 ------------------------------------------------------------------- OCTET0 bit0 matchedSourseMac 匹配的源Mac OCTET0 bit1 matchedDestinationMac 匹配的目的Mac OCTET0 bit2 matchedVlanId 匹配的vlan id OCTET0 bit3 matchedEthernetType 匹配的以太网类型 OCTET0 bit4 matchedSourseIP 匹配的源IP OCTET0 bit5 matchedDestinationIP 匹配的目的IP OCTET0 bit6 matchedIpMessageType 匹配的IP报文类型 OCTET0 bit7 matchedDscp 匹配的dscp OCTET1 bit0 matchedSoursePort 匹配的源端口 OCTET1 bit1 matchedDestinationPort 匹配的目的端口 OCTET1 bit2 matchedSourseMacMask 匹配的源MAC掩码 OCTET1 bit3 matchedDestinationMacMask 匹配的目的MAC掩码 OCTET1 bit4 matchedSourseIPMask 匹配的源IP掩码 OCTET1 bit5 matchedDestinationIPMask 匹配的目的IP掩码 比如匹配sourceIP(OCTET0 bit4)和sourceIPMask(OCTET1 bit4)，设置成0x08 08" ::= { aclRuleEntry 14 } aclAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2), mark(3) } MAX-ACCESS read-create STATUS current DESCRIPTION " ACL规则动作(permit、deny、标记等)" ::= { aclRuleEntry 15 } aclActionParameter OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " ACL规则动作参数。只对aclAction为mark(3)有效,对于aclAction其他值, 此对象禁止配置,get时返回NULL。 按照INTERNET顺序从左往右的方向排列,第一个为OCTET0,第n个为OCTET [n-1]。 OCTET 0 表示 MARK 类型。后面的OCTET 表示这种类型的MARK的目标值,这 是否这些OCTET的长度取决于MARK类型,比如对应于改MARK类型的参数的SYNTAX 为INTEGER,则需要4个字节,表示对应的数值。 MARK类型 目标值的SYNTAX 描述 ------------------------------------------------------------------- 0 Reserved 1 INTEGER (0..7) MARK 801.1p的值(外层VLAN) 2 INTEGER (1..4094) MARK VLAN ID(外层VLAN) 3 INTEGER (0..7) MARK TOS PRECEDENCE 4 INTEGER (0..63) MARK DSCP 5..255 Reserved 比如修改VLAN ID为100,对应的值为：02 00 00 00 64" ::= { aclRuleEntry 16 } matchedSourceMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源Mac 反掩码. " ::= { aclRuleEntry 17 } matchedDestinationMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的Mac反掩码. " ::= { aclRuleEntry 18 } matchedSourceIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源IP反掩码. " ::= { aclRuleEntry 19 } matchedDestinationIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的IP反掩码. " ::= { aclRuleEntry 20 } portACLListTable OBJECT-TYPE SYNTAX SEQUENCE OF PortACLListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口ACL列表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device(OLT作为SNMP Agent): Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of aclDeviceIndex shall be set to 0, /OLT SNI aclCardIndex, and aclPortIndex set to 0 indicates meaningless OLT onu ID - Set aclDeviceIndex to corresponding ONU ID, aclCardIndex, and aclPortIndex set to 0 indicates meaningless ONU UNI - Set aclDeviceIndex to corresponding ONU ID, aclCardIndex, and aclPortIndex set to the corresponding value 2. If the table is maintained in ONU device(ONU作为SNMP Agent): aclDeviceIndex shall be set to 0 to indicate meaningless. aclCardIndex shall be set to corresponding slot. aclPortIndex shall be set to corresponding port. " ::= { aclManagementGroup 3 } portACLListEntry OBJECT-TYPE SYNTAX PortACLListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aclDeviceIndex, aclCardIndex, aclPortIndex, portAclListIndex } ::= { portACLListTable 1 } PortACLListEntry ::= SEQUENCE { aclDeviceIndex EponDeviceIndex, aclCardIndex EponCardIndex, aclPortIndex EponPortIndex, portAclListIndex INTEGER, aclPortDirection OCTET STRING, aclRowStatus RowStatus } aclDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 For OLT Agent, set to corresponding PON port, SNI, or ONU For ONU Agent, set to 0 " ::= { portACLListEntry 1 } aclCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 For OLT Agent, set to 0, For ONU Agent, set to corresponding slot " ::= { portACLListEntry 2 } aclPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号 For OLT Agent, set to 0, For ONU Agent, set to corresponding slot " ::= { portACLListEntry 3 } portAclListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口ACL表索引" ::= { portACLListEntry 4 } aclPortDirection OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION " ACL应用到出口或入口,入口必须实现,出口可选 0x80 for ingress 0x40 for egress 0xC0 for ingress and egress" ::= { portACLListEntry 5 } aclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " ACL应用状态" ::= { portACLListEntry 6 } ponBroadcastStormSuppressionTable OBJECT-TYPE SYNTAX SEQUENCE OF PonBroadcastStormSuppressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 广播风暴抑制表 注：若不支持端口级别的配置,则配置一个端口,同一板卡的所有端口的配置均生效" ::= { ponPortObjects 3 } ponBroadcastStormSuppressionEntry OBJECT-TYPE SYNTAX PonBroadcastStormSuppressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { bsDeviceIndex, bsCardIndex, bsPortIndex } ::= { ponBroadcastStormSuppressionTable 1 } PonBroadcastStormSuppressionEntry ::= SEQUENCE { bsDeviceIndex INTEGER, bsCardIndex EponCardIndex, bsPortIndex EponPortIndex, unicastStormEnable TruthValue, unicastStormInPacketRate INTEGER, unicastStormOutPacketRate INTEGER, multicastStormEnable TruthValue, multicastStormInPacketRate INTEGER, multicastStormOutPacketRate INTEGER, broadcastStormEnable TruthValue, broadcastStormInPacketRate INTEGER, broadcastStormOutPacketRate INTEGER } bsDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { ponBroadcastStormSuppressionEntry 1 } bsCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { ponBroadcastStormSuppressionEntry 2 } bsPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口索引号" ::= { ponBroadcastStormSuppressionEntry 3 } unicastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 未知单播风暴抑制使能" ::= { ponBroadcastStormSuppressionEntry 4 } unicastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 未知单播风暴抑制入口速率" ::= { ponBroadcastStormSuppressionEntry 5 } unicastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 未知单播风暴抑制出口速率" ::= { ponBroadcastStormSuppressionEntry 6 } multicastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 组播风暴抑制使能" ::= { ponBroadcastStormSuppressionEntry 7 } multicastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 组播风暴抑制入口速率" ::= { ponBroadcastStormSuppressionEntry 8 } multicastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 组播风暴抑制出口速率" ::= { ponBroadcastStormSuppressionEntry 9 } broadcastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制使能" ::= { ponBroadcastStormSuppressionEntry 10 } broadcastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制入口速率" ::= { ponBroadcastStormSuppressionEntry 11 } broadcastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制出口速率" ::= { ponBroadcastStormSuppressionEntry 12 } ponOnuAuthenticationModeTable OBJECT-TYPE SYNTAX SEQUENCE OF PonOnuAuthenticationModeEntry MAX-ACCESS not-accessible STATUS optional DESCRIPTION "基于PON口的ONU认证模式表" ::= { ponPortObjects 4 } ponOnuAuthenticationModeEntry OBJECT-TYPE SYNTAX PonOnuAuthenticationModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ponOnuAuthenticationModeEntry Information" INDEX{ ponAuthenDeviceIndex,ponAuthenCardIndex,ponAuthenPortIndex} ::={ ponOnuAuthenticationModeTable 1 } PonOnuAuthenticationModeEntry ::= SEQUENCE { ponAuthenDeviceIndex INTEGER, ponAuthenCardIndex EponCardIndex, ponAuthenPortIndex EponPortIndex, ponOnuAuthenMode INTEGER, onuAuthenModeRowStatus RowStatus } ponAuthenDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。一个OLT节点可以由多台OLT设备组成。 节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { ponOnuAuthenticationModeEntry 1 } ponAuthenCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引号" ::= { ponOnuAuthenticationModeEntry 2 } ponAuthenPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "pon端口索引号" ::= { ponOnuAuthenticationModeEntry 3 } ponOnuAuthenMode OBJECT-TYPE SYNTAX INTEGER { logical-ID-and-logical-password(1), physics-ID-or-logical-ID-password(2), logical-ID(3), physics-ID-or-logical-ID-notPassword(4), mac(5), auto(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Authen mode；This is mode in authen , 注：同一个PON口下的所有ONU只能使用一同认证模式" ::= { ponOnuAuthenticationModeEntry 4 } ponPortOpticalTransmissionPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF PonPortOpticalTransmissionPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 光端口传输特性表 注：若不支持端口级别的配置,则配置一个端口,同一板卡的所有端口的配置均生效" ::= { ponPortObjects 5 } ponPortOpticalTransmissionPropertyEntry OBJECT-TYPE SYNTAX PonPortOpticalTransmissionPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ponOpDeviceIndex, ponOpCardIndex, ponOpPortIndex } ::= { ponPortOpticalTransmissionPropertyTable 1 } PonPortOpticalTransmissionPropertyEntry ::= SEQUENCE { ponOpDeviceIndex INTEGER, ponOpCardIndex EponCardIndex, ponOpPortIndex EponPortIndex, ponOpVcc INTEGER, ponOpBias INTEGER, ponOpTxPower INTEGER, ponOpRxPower INTEGER, ponOpTemperature INTEGER } ponOpDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { ponPortOpticalTransmissionPropertyEntry 1 } ponOpCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS read-only STATUS current DESCRIPTION " 板卡索引号。" ::= { ponPortOpticalTransmissionPropertyEntry 2 } ponOpPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS read-only STATUS current DESCRIPTION " 端口索引号。" ::= { ponPortOpticalTransmissionPropertyEntry 3 } ponOpVcc OBJECT-TYPE SYNTAX INTEGER UNITS "centi-mV" MAX-ACCESS read-only STATUS current DESCRIPTION " 电压。" ::= { ponPortOpticalTransmissionPropertyEntry 4 } ponOpBias OBJECT-TYPE SYNTAX INTEGER UNITS "centi-mA" MAX-ACCESS read-only STATUS current DESCRIPTION " 电流。" ::= { ponPortOpticalTransmissionPropertyEntry 5 } ponOpTxPower OBJECT-TYPE SYNTAX INTEGER UNITS "centi-dBm" MAX-ACCESS read-only STATUS current DESCRIPTION " 发送功率。" ::= { ponPortOpticalTransmissionPropertyEntry 6 } -- 1.3.6.1.4.1.17409.2.3.3.5.1.7 ponOpRxPower OBJECT-TYPE SYNTAX INTEGER UNITS "centi-dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "接收功率." ::= { ponPortOpticalTransmissionPropertyEntry 7 } -- 1.3.6.1.4.1.17409.2.3.3.5.1.100 ponOpTemperature OBJECT-TYPE SYNTAX INTEGER UNITS "centi-C" MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature." ::= { ponPortOpticalTransmissionPropertyEntry 100 } -- 基于OLT PON口的ONU接收光功率 ponPortOpticalRxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF PonPortOpticalRxPowerEntry MAX-ACCESS not-accessible STATUS optional DESCRIPTION "基于OLT PON口的ONU接收光功率" ::= { ponPortObjects 6 } ponPortOpticalRxPowerEntry OBJECT-TYPE SYNTAX PonPortOpticalRxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ponPortOpticalRxPowerEntry Information" INDEX{ ponOpRxOfOnuDeviceIndex} ::={ ponPortOpticalRxPowerTable 1 } PonPortOpticalRxPowerEntry ::= SEQUENCE { ponOpRxOfOnuDeviceIndex EponDeviceIndex, ponOpRxPowerOfOnu INTEGER } ponOpRxOfOnuDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "onuDevice Index" ::= { ponPortOpticalRxPowerEntry 1 } ponOpRxPowerOfOnu OBJECT-TYPE SYNTAX INTEGER UNITS "centi-dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "OLT pon port received onu optical power" ::= { ponPortOpticalRxPowerEntry 2} -------------------------------------------------------------------------------- -- onuObjects[ONU属性管理项](1.3.6.1.4.1.17409.2.3.4) -------------------------------------------------------------------------------- onuInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuInfoTable entries. " ::= {onuObjects 1 } onuInfoEntry OBJECT-TYPE SYNTAX OnuInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuInfoEntry Information" INDEX { onuDeviceIndex } ::={onuInfoTable 1 } OnuInfoEntry ::= SEQUENCE { onuDeviceIndex EponDeviceIndex, onuName DisplayString, onuType INTEGER, onuIpAddress IpAddress, onuIpSubnetMask IpAddress, onuIpGateway IpAddress, onuMacAddress MacAddress, onuOperationStatus INTEGER, onuAdminStatus INTEGER, onuChipVendor DisplayString, onuChipType DisplayString, onuChipVersion DisplayString, onuSoftwareVersion DisplayString, onuFirmwareVersion DisplayString, onuTestDistance INTEGER, onuLlidId INTEGER, resetONU INTEGER, onuTimeSinceLastRegister Counter32, onuMgmtCvlan INTEGER, onuMgmtSvlan INTEGER, onuMgmtPriority INTEGER, onuVendorId DisplayString, onuModelId DisplayString, onuHardwareVersion DisplayString, onuSn DisplayString, onuTimeLastRegister DateAndTime } onuDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "onuDevice Index" ::= {onuInfoEntry 1 } onuName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "onu Name" ::= {onuInfoEntry 2 } onuType OBJECT-TYPE SYNTAX INTEGER { fixed(1), chassisBased(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "onu Type fixed(1) - not slot concept chassisBased(2) - port is indexed by coupling slot ID" ::= {onuInfoEntry 3 } onuIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "onu Ip Address" ::= {onuInfoEntry 4 } onuIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "onu Ip Subnet Mask" ::= {onuInfoEntry 5 } onuIpGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "onu Ip Gateway" ::= {onuInfoEntry 6 } onuMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "onuMac Address" ::= {onuInfoEntry 7 } onuOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "onu Operation Status" ::= {onuInfoEntry 8 } onuAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "onu Admin Status, down(2),不给授权,关闭数据通道" ::= {onuInfoEntry 9 } onuChipVendor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "onu Chip Vendor" ::= {onuInfoEntry 10 } onuChipType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "onu Chip Type" ::= {onuInfoEntry 11 } onuChipVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "onu Chip Version" ::= {onuInfoEntry 12 } onuSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "onu Software Version" ::= {onuInfoEntry 13 } onuFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "onu Firmware Version" ::= {onuInfoEntry 14 } onuTestDistance OBJECT-TYPE SYNTAX INTEGER UNITS "Meter" MAX-ACCESS read-only STATUS current DESCRIPTION "onu Test Distance" ::= {onuInfoEntry 15 } onuLlidId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "onu Llid Id" ::= {onuInfoEntry 16 } resetONU OBJECT-TYPE SYNTAX INTEGER { reset(1), none(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "reset ONU" ::= {onuInfoEntry 17 } onuTimeSinceLastRegister OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds, since the time when the ONU is registered" ::= {onuInfoEntry 18 } onuMgmtCvlan OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "CVLAN ID of management data for the ONU" ::= {onuInfoEntry 19 } onuMgmtSvlan OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS optional DESCRIPTION "SVLAN ID of management data for the ONU Set to 0, means only single VLAN is supported, no SVLAN concept, for the ONU management" ::= {onuInfoEntry 20 } onuMgmtPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS optional DESCRIPTION "Tagged dot1p priority of management data for the ONU" ::= {onuInfoEntry 21 } onuVendorId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ONU vendor id." ::= {onuInfoEntry 25 } onuModelId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ONU model id." ::= {onuInfoEntry 26 } onuHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ONU hardware version." ::= {onuInfoEntry 27 } onuSn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ONU serial number." ::= {onuInfoEntry 28 } onuTimeLastRegister OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " ONU最后注册时间 " ::= {onuInfoEntry 29 } onuPonPortOpticalTransmissionPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuPonPortOpticalTransmissionPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is designed for both OLT and ONU Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT - OnuNum of EponDeviceIndex TC shall be set to 0, onuPonPortOpticalTransmissionPropertyCardIndex, and onuPonPortOpticalTransmissionPropertyPortIndex set to 65535 indicates meaningless ONU - Set EponDeviceIndex TC to corresponding ONU ID, onuPonPortOpticalTransmissionPropertyCardIndex, and onuPonPortOpticalTransmissionPropertyPortIndex set to the corresponding value " ::= {onuObjects 2 } onuPonPortOpticalTransmissionPropertyEntry OBJECT-TYPE SYNTAX OnuPonPortOpticalTransmissionPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuPonPortOpticalTransmissionPropertyEntry Information" INDEX { onuPonPortOpticalTransmissionPropertyDeviceIndex, onuPonPortOpticalTransmissionPropertyCardIndex,onuPonPortOpticalTransmissionPropertyPortIndex } ::={onuPonPortOpticalTransmissionPropertyTable 1 } OnuPonPortOpticalTransmissionPropertyEntry ::= SEQUENCE { onuPonPortOpticalTransmissionPropertyDeviceIndex EponDeviceIndex, onuPonPortOpticalTransmissionPropertyCardIndex INTEGER, onuPonPortOpticalTransmissionPropertyPortIndex INTEGER, onuReceivedOpticalPower INTEGER, onuTramsmittedOpticalPower INTEGER, onuBiasCurrent INTEGER, onuWorkingVoltage INTEGER, onuWorkingTemperature INTEGER } onuPonPortOpticalTransmissionPropertyDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Device Index of the ONU." ::= {onuPonPortOpticalTransmissionPropertyEntry 1 } onuPonPortOpticalTransmissionPropertyCardIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Card Index in the ONU. Shall set to 0, if ONU is not a modulized device" ::= {onuPonPortOpticalTransmissionPropertyEntry 2 } onuPonPortOpticalTransmissionPropertyPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Index in the Pon card of ONU" ::= {onuPonPortOpticalTransmissionPropertyEntry 3 } onuReceivedOpticalPower OBJECT-TYPE SYNTAX INTEGER UNITS "centi-dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "received Optical Power" ::= {onuPonPortOpticalTransmissionPropertyEntry 4 } onuTramsmittedOpticalPower OBJECT-TYPE SYNTAX INTEGER UNITS "centi-dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "tramsmitted Optical Power" ::= {onuPonPortOpticalTransmissionPropertyEntry 5 } onuBiasCurrent OBJECT-TYPE SYNTAX INTEGER UNITS "centi-mA" MAX-ACCESS read-only STATUS current DESCRIPTION "biasCurrent" ::= {onuPonPortOpticalTransmissionPropertyEntry 6 } onuWorkingVoltage OBJECT-TYPE SYNTAX INTEGER UNITS "centi-mV" MAX-ACCESS read-only STATUS current DESCRIPTION "onuworking Voltage" ::= {onuPonPortOpticalTransmissionPropertyEntry 7 } onuWorkingTemperature OBJECT-TYPE SYNTAX INTEGER UNITS "Centi-degree centigrade" MAX-ACCESS read-only STATUS current DESCRIPTION "working Temperature" ::= {onuPonPortOpticalTransmissionPropertyEntry 8 } onuCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuInfoTable entries. " ::= {onuObjects 3 } onuCapabilityEntry OBJECT-TYPE SYNTAX OnuCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuCapabilityEntry Information" INDEX { onuCapabilityDeviceIndex } ::={onuCapabilityTable 1 } OnuCapabilityEntry ::= SEQUENCE { onuCapabilityDeviceIndex EponDeviceIndex, onuGePortNum INTEGER, onuGePortBitmap OCTET STRING, onuFePortNum INTEGER, onuFePortBitmap OCTET STRING, onuQueueNumUplink INTEGER, onuMaxQueueNumUplink INTEGER, onuQueueNumDownlink INTEGER, onuMaxQueueNumDownlink INTEGER, onuFecEnable TruthValue, onuEncryptMode INTEGER, onuEncryptKeyExchangeTime TimeTicks, onuIsolationEnable TruthValue } onuCapabilityDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "onu Device Index" ::= {onuCapabilityEntry 1 } onuGePortNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "gePort Num" ::= {onuCapabilityEntry 2 } onuGePortBitmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "gePort Bitmap In slot+port pair list manner. Suppose each slot support up to 64 ports. One octet to indentify slot and 8 octets to identify portbitmap for the slot. The bitmap definition is internet sequence. The most left bit is for port 1 of the slot, the most right bit is for port 64 of the slot. If the slot cannot support 64 ports, set the bits of not supported ports to 0. If the port is GE port, set the corresponding bit to 1. Since the slot num depends on each individual device, the object is variable length. If the device is fixed box (not modulized), set the slot number to 255. Then the network management system could ignore the slot info. It is not necessary to list the slot doesn't support GE port. For example, if have 4 GE ports, of: 1/4, 1/6, 2/3, 4/17, the object will be presented in: 01 14 00 00 00 00 00 00 00 02 20 00 00 00 00 00 00 00 04 00 00 80 00 00 00 00 00 Another example, for fixed box, if have 4 ge ports of 4,6,10,17, the object will be presented as: FF 14 40 10 00 00 00 00 " ::= {onuCapabilityEntry 3 } onuFePortNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "fePort Num" ::= {onuCapabilityEntry 4 } onuFePortBitmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "fePort Bitmap In slot+port pair list manner. Suppose each slot support up to 64 ports. One octet to indentify slot and 8 octets to identify portbitmap for the slot. The bitmap definition is internet sequence. The most left bit is for port 1 of the slot, the most right bit is for port 64 of the slot. If the slot cannot support 64 ports, set the bits of not supported ports to 0. If the port is FE port, set the corresponding bit to 1. Since the slot num depends on each individual device, the object is variable length. If the device is fixed box (not modulized), set the slot number to 255. Then the network management system could ignore the slot info. It is not necessary to list the slot doesn't support FE port. For example, if have 4 FE ports, of: 1/4, 1/6, 2/3, 4/17, the object will be presented in: 01 14 00 00 00 00 00 00 00 02 20 00 00 00 00 00 00 00 04 00 00 80 00 00 00 00 00 Another example, for fixed box, if have 4 FE ports of 4,6,10,17, the object will be presented as: FF 14 40 10 00 00 00 00 " ::= {onuCapabilityEntry 5 } onuQueueNumUplink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "queue Num Uplink" ::= {onuCapabilityEntry 6 } onuMaxQueueNumUplink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "max Queue Num Uplink" ::= {onuCapabilityEntry 7 } onuQueueNumDownlink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "queue Num Downlink" ::= {onuCapabilityEntry 8 } onuMaxQueueNumDownlink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "max Queue Num Downlink" ::= {onuCapabilityEntry 9 } onuFecEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "fec Enable" ::= {onuCapabilityEntry 10 } onuEncryptMode OBJECT-TYPE SYNTAX INTEGER { aes128(1), ctcTripleChurning(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "encrypt Mode" ::= {onuCapabilityEntry 11 } onuEncryptKeyExchangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "encryptKeyExchange Time" ::= {onuCapabilityEntry 12 } onuIsolationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " ONU端口隔离使能 true(1) false(2)" ::= { onuCapabilityEntry 13 } slaTable OBJECT-TYPE SYNTAX SEQUENCE OF SlaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of slaTable entries. " ::= {onuObjects 4 } slaEntry OBJECT-TYPE SYNTAX SlaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slaEntry Information" INDEX { slaIndex } ::={slaTable 1 } SlaEntry ::= SEQUENCE { slaIndex EponDeviceIndex, slaDsFixedBW INTEGER, slaDsPeakBW INTEGER, slaDsCommittedBW INTEGER, slaUsFixedBW INTEGER, slaUsPeakBW INTEGER, slaUsCommittedBW INTEGER } slaIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "sla Index" ::= {slaEntry 1 } slaDsFixedBW OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Downstream sla FixedBW" ::= {slaEntry 2 } slaDsPeakBW OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Downstream sla PeakBW" ::= {slaEntry 3 } slaDsCommittedBW OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Downstream sla CommittedBW" ::= {slaEntry 4 } slaUsFixedBW OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Upstream sla FixedBW" ::= {slaEntry 5 } slaUsPeakBW OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Upstream sla PeakBW" ::= {slaEntry 6 } slaUsCommittedBW OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Upstream sla CommittedBW" ::= {slaEntry 7 } onuAuthenticationManagement OBJECT-IDENTITY STATUS current DESCRIPTION "ONU认证管理" ::= { onuObjects 5 } onuAuthenticationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuAuthenticationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuAuthenticationConfigTable entries. " ::= {onuAuthenticationManagement 2 } onuAuthenticationConfigEntry OBJECT-TYPE SYNTAX OnuAuthenticationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuAuthenticationConfigEntry Information" INDEX { onuAuthenOnuId } ::={onuAuthenticationConfigTable 1 } OnuAuthenticationConfigEntry ::= SEQUENCE { onuAuthenOnuId EponDeviceIndex, onuAuthenMacAddress MacAddress, onuAuthenRowStatus INTEGER } onuAuthenOnuId OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "onu logical ID" ::= {onuAuthenticationConfigEntry 1 } onuAuthenMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "onu Mac Address" ::= {onuAuthenticationConfigEntry 2 } onuAuthenRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "authen Row Status" ::= {onuAuthenticationConfigEntry 4 } onuAuthenticationBlockTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuAuthenticationBlockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuAuthenticationBlockTable entries. " ::= {onuAuthenticationManagement 3 } onuAuthenticationBlockEntry OBJECT-TYPE SYNTAX OnuAuthenticationBlockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuAuthenticationBlockEntry Information" INDEX { onuAuthenBlockOnuId } ::={onuAuthenticationBlockTable 1 } OnuAuthenticationBlockEntry ::= SEQUENCE { onuAuthenBlockOnuId EponDeviceIndex, onuAuthenBlockMacAddress MacAddress, authenBlockTime TimeTicks, onuAuthenBlockRowStatus RowStatus } onuAuthenBlockOnuId OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ONU Id" ::= {onuAuthenticationBlockEntry 1 } onuAuthenBlockMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Mac Address" ::= {onuAuthenticationBlockEntry 2 } authenBlockTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-create STATUS current DESCRIPTION "加入黑名单时间" ::= {onuAuthenticationBlockEntry 3 } onuAuthenBlockRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Row Status" ::= { onuAuthenticationBlockEntry 4 } onuLoidAuthenticationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuLoidAuthenticationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onu LOID AuthenticationConfigTable entries. " ::= {onuAuthenticationManagement 4 } onuLoidAuthenticationConfigEntry OBJECT-TYPE SYNTAX OnuLoidAuthenticationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuLoidAuthenticationConfigEntryInformation" INDEX { onuLoidAuthenOnuId} ::={ onuLoidAuthenticationConfigTable 1 } OnuLoidAuthenticationConfigEntry ::= SEQUENCE { onuLoidAuthenOnuId EponDeviceIndex, onuLoidAuthenLOID OCTET STRING, onuLoidAuthenPassword OCTET STRING, onuLoidAuthenRowStatus RowStatus, } onuLoidAuthenOnuId OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "onu logical ID" ::= { onuLoidAuthenticationConfigEntry 1 } onuLoidAuthenLOID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..24)) MAX-ACCESS read-create STATUS current DESCRIPTION " ONU认证逻辑标识 " ::= { onuLoidAuthenticationConfigEntry 2 } onuLoidAuthenPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..12)) MAX-ACCESS read-create STATUS current DESCRIPTION "密码为0～12位的字符串,如356abc,当位数为0的时候,表示没有密码" ::= { onuLoidAuthenticationConfigEntry 3 } onuLoidAuthenRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Row Status" ::= { onuLoidAuthenticationConfigEntry 4 } onuAutoFindTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuAutoFindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of autofind list entries. " ::= { onuObjects 6 } onuAutoFindEntry OBJECT-TYPE SYNTAX OnuAutoFindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuAutoFindEntry Information 自动上电上线的未授权的ONU,全部只读,不做配置" INDEX { onuAutoFindOnuIndex } ::={ onuAutoFindTable 1 } OnuAutoFindEntry ::= SEQUENCE { onuAutoFindOnuIndex EponDeviceIndex, onuAutoFindMacAddress MacAddress, onuAutoFindTime TimeTicks, onuAutoFindAuthenLOID OCTET STRING, onuAutoFindAuthenPassword OCTET STRING } onuAutoFindOnuIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "index " ::= { onuAutoFindEntry 1 } onuAutoFindMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac Address" ::= { onuAutoFindEntry 2 } onuAutoFindTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "上线时间" ::= { onuAutoFindEntry 3 } onuAutoFindAuthenLOID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..24)) MAX-ACCESS read-only STATUS current DESCRIPTION " ONU认证逻辑标识； 当位数为0的时候,表示没有 " ::= { onuAutoFindEntry 4 } onuAutoFindAuthenPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "密码为0～12位的字符串,如356abc,当位数为0的时候,表示没有密码" ::= { onuAutoFindEntry 5 } -------------------------------------------------------------------------------- -- uniObjects[UNI用户端口属性管理项](1.3.6.1.4.1.17409.2.3.5) -------------------------------------------------------------------------------- uniAttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF UniAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of uniAttributeTable entries." ::= {uniObjects 1 } uniAttributeEntry OBJECT-TYPE SYNTAX UniAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The uniAttributeEntry Information" INDEX { uniAttributeDeviceIndex, uniAttributeCardIndex,uniAttributePortIndex } ::={uniAttributeTable 1 } UniAttributeEntry ::= SEQUENCE { uniAttributeDeviceIndex EponDeviceIndex, uniAttributeCardIndex EponCardIndex, uniAttributePortIndex EponPortIndex, uniAdminStatus INTEGER, uniOperationStatus INTEGER, uniAutoNegotiationEnable TruthValue, uniAutoNegotiationLocalTechAbility AutoNegotiationTechAbility, uniAutoNegotiationRestart INTEGER, uniMacAddrLearnMaxNum INTEGER, uniCurrentPerfStatsEnable TruthValue } uniAttributeDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Device Index For OLT Agent, set to corresponding ONU ID For ONU Agent, set to 0 " ::= {uniAttributeEntry 1 } uniAttributeCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Card Index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero " ::= {uniAttributeEntry 2 } uniAttributePortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Index" ::= {uniAttributeEntry 3 } uniAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin Status" ::= {uniAttributeEntry 4 } uniOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operation Status" ::= {uniAttributeEntry 5 } uniAutoNegotiationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to enable auto negotiation on the uni port" ::= {uniAttributeEntry 6 } uniAutoNegotiationLocalTechAbility OBJECT-TYPE SYNTAX AutoNegotiationTechAbility MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the technology ability of the local device" ::= {uniAttributeEntry 7 } uniAutoNegotiationRestart OBJECT-TYPE SYNTAX INTEGER { restart(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restart the autonegotiation" ::= {uniAttributeEntry 8 } uniMacAddrLearnMaxNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Mac Address Learn Max Num" ::= { uniAttributeEntry 9 } uniCurrentPerfStatsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1) false(2)" ::= { uniAttributeEntry 10 } uniMacAddressManagement OBJECT-IDENTITY STATUS current DESCRIPTION "" ::= { uniObjects 2 } uniMacAddressManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF UniMacAddressManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MacAddress global parameter in a onu." ::= { uniMacAddressManagement 1 } uniMacAddressManagementEntry OBJECT-TYPE SYNTAX UniMacAddressManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { uniMacAddrONUIndex } ::= { uniMacAddressManagementTable 1 } UniMacAddressManagementEntry::= SEQUENCE { uniMacAddrONUIndex EponDeviceIndex, uniMacAddrAgingTime INTEGER, uniMacAddrClear INTEGER } uniMacAddrONUIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "onuDevice Index" ::= { uniMacAddressManagementEntry 1 } uniMacAddrAgingTime OBJECT-TYPE SYNTAX INTEGER UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Mac Address Table Aging Time" ::= { uniMacAddressManagementEntry 2 } uniMacAddrClear OBJECT-TYPE SYNTAX INTEGER { allDynamic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mac Address Table Clear" ::= { uniMacAddressManagementEntry 3 } uniPortRateLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF UniPortRateLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of PortRateLimit entries." ::= { uniObjects 4 } uniPortRateLimitEntry OBJECT-TYPE SYNTAX UniPortRateLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port Rate Limit Information" INDEX { uniPortRateLimitDeviceIndex, uniPortRateLimitCardIndex, uniPortRateLimitPortIndex } ::= { uniPortRateLimitTable 1 } UniPortRateLimitEntry ::= SEQUENCE { uniPortRateLimitDeviceIndex EponDeviceIndex, uniPortRateLimitCardIndex EponCardIndex, uniPortRateLimitPortIndex EponPortIndex, uniPortInCIR INTEGER, uniPortInCBS INTEGER, uniPortInEBS INTEGER, uniPortOutCIR INTEGER, uniPortOutPIR INTEGER, uniPortInRateLimitEnable TruthValue, uniPortOutRateLimitEnable TruthValue } uniPortRateLimitDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "device Index For OLT Agent, set to corresponding ONU ID For ONU Agent, set to 0 " ::= { uniPortRateLimitEntry 1 } uniPortRateLimitCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "card Index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero " ::= { uniPortRateLimitEntry 2 } uniPortRateLimitPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "port Index" ::= { uniPortRateLimitEntry 3 } uniPortInCIR OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Information Rate(CIR) in kbps." ::= { uniPortRateLimitEntry 4 } uniPortInCBS OBJECT-TYPE SYNTAX INTEGER UNITS "Kbytes" MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Burst Rate(CBS) in kbyte." ::= { uniPortRateLimitEntry 5 } uniPortInEBS OBJECT-TYPE SYNTAX INTEGER UNITS "Kbytes" MAX-ACCESS read-write STATUS current DESCRIPTION "ebs in kbytes." ::= { uniPortRateLimitEntry 6 } uniPortOutCIR OBJECT-TYPE SYNTAX INTEGER UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Information Rate(CIR) in kbps." ::= { uniPortRateLimitEntry 7 } uniPortOutPIR OBJECT-TYPE SYNTAX INTEGER UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "PIR in kbps." ::= { uniPortRateLimitEntry 8 } uniPortInRateLimitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to enable or disable ingress rate limit for the UNI." ::= { uniPortRateLimitEntry 9 } uniPortOutRateLimitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to enable or disable egress rate limit for the UNI." ::= { uniPortRateLimitEntry 10 } -------------------------------------------------------------------------------- -- igmpManagementObjects[IGMP管理项](1.3.6.1.4.1.17409.2.3.6) -------------------------------------------------------------------------------- igmpEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " IGMP实体表" ::= { igmpManagementObjects 1 } igmpEntityEntry OBJECT-TYPE SYNTAX IgmpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { igmpDeviceIndex } ::= { igmpEntityTable 1 } IgmpEntityEntry ::= SEQUENCE { igmpDeviceIndex INTEGER, igmpMode INTEGER, maxQueryResponseTime INTEGER, robustVariable INTEGER, queryInterval INTEGER, lastMemberQueryInterval INTEGER, lastMemberQueryCount INTEGER, igmpVersion INTEGER } igmpDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 For OLT Agent, set to corresponding device For ONU Agent, set to 0" ::= { igmpEntityEntry 1 } igmpMode OBJECT-TYPE SYNTAX INTEGER { centralized(1), distributedwithcm(2), disabled(3), distributedwocm(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " IGMP工作模式 1代表proxy,2代表可控组播,3代表disabled,4代表snooping模式 " DEFVAL { disabled } ::= { igmpEntityEntry 2 } maxQueryResponseTime OBJECT-TYPE SYNTAX INTEGER UNITS "tenth second" MAX-ACCESS read-write STATUS current DESCRIPTION " 最大响应查询时间 单位：1/10秒 This is used for sending general query" ::= { igmpEntityEntry 3 } robustVariable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 健壮性变量 This is used for sending general query No less than 1" ::= { igmpEntityEntry 4 } queryInterval OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " 发送查询报文的时间间隔 单位：秒 This is used for sending general query " ::= { igmpEntityEntry 5 } lastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER UNITS "tenth second" MAX-ACCESS read-write STATUS current DESCRIPTION " Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages " ::= { igmpEntityEntry 6 } lastMemberQueryCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " Number of Group-Specific Queries sent before the router assumes there are no local members " ::= { igmpEntityEntry 7 } igmpVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2), v3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " IGMP版本 " DEFVAL { v2 } ::= { igmpEntityEntry 8 } igmpProxyParaTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpProxyParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " IGMP proxy参数表 - 频道列表" ::= { igmpManagementObjects 2 } igmpProxyParaEntry OBJECT-TYPE SYNTAX IgmpProxyParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { proxyIndex } ::= { igmpProxyParaTable 1 } IgmpProxyParaEntry ::= SEQUENCE { proxyIndex INTEGER, proxyName OCTET STRING, proxySrcIPAddress IpAddress, proxyMulticastVID INTEGER, proxyMulticastIPAddress IpAddress, multicastMaxBW Unsigned32, proxyRowStatus RowStatus } proxyIndex OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS not-accessible STATUS current DESCRIPTION " IGMP Proxy索引号 - 频道号" ::= { igmpProxyParaEntry 1 } proxyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION " IGMP Proxy别名(如央视、文广传媒等)" ::= { igmpProxyParaEntry 2 } proxySrcIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " igmp v3中的源ip地址,具体见igmp v3协议。" ::= { igmpProxyParaEntry 3 } proxyMulticastVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " IGMP Proxy对应组播VID 注：只有在可控组播模式下组播VID才有意义" ::= { igmpProxyParaEntry 4 } proxyMulticastIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 组播IP地址" ::= { igmpProxyParaEntry 5 } multicastMaxBW OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " 组播最大带宽 单位：kbps" ::= { igmpProxyParaEntry 7 } proxyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { igmpProxyParaEntry 8 } igmpForwardingTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpForwardingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Multicast forwarding table " ::= { igmpManagementObjects 3 } igmpForwardingEntry OBJECT-TYPE SYNTAX IgmpForwardingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { groupDeviceIndex, groupVlanIndex, groupIPAddress } ::= { igmpForwardingTable 1 } IgmpForwardingEntry ::= SEQUENCE { groupDeviceIndex INTEGER, groupVlanIndex INTEGER, groupIPAddress IpAddress, groupPortList OCTET STRING } groupDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 For OLT Agent, set to corresponding OLT device For ONU Agent, set to 0 " ::= { igmpForwardingEntry 1 } groupVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " Vlan索引号" ::= { igmpForwardingEntry 2 } groupIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " 组IP地址索引号" ::= { igmpForwardingEntry 3 } groupPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Forwarding port list 1. OLT ------------------------------------------------------------------- It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 2. ONU ------------------------------------------------------------------- It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of member ports. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the member ports of the group, then the object is presented as: 01 02 03 04 " ::= { igmpForwardingEntry 4 } controllededMulticastTable OBJECT-IDENTITY STATUS current DESCRIPTION " 可控组播表" ::= { igmpManagementObjects 4 } controlledMulticastUserAuthorityTable OBJECT-TYPE SYNTAX SEQUENCE OF ControlledMulticastUserAuthorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 可控组播用户权限表 " ::= { controllededMulticastTable 1 } controlledMulticastUserAuthorityEntry OBJECT-TYPE SYNTAX ControlledMulticastUserAuthorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { cmDeviceIndex, cmCardIndex, cmPortIndex } ::= { controlledMulticastUserAuthorityTable 1 } ControlledMulticastUserAuthorityEntry ::= SEQUENCE { cmDeviceIndex EponDeviceIndex, cmCardIndex EponCardIndex, cmPortIndex EponPortIndex, multicastPackageList OCTET STRING, igmpGlobalBW Unsigned32, igmpGlobalBWUsed Unsigned32, cmUserAuthorityRowStatus RowStatus } cmDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号 For OLT Agent, set to corresponding device/slot/port/ONU For ONU Agent, set to 0" ::= { controlledMulticastUserAuthorityEntry 1 } cmCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 Set to corresponding UNI slot " ::= { controlledMulticastUserAuthorityEntry 2 } cmPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Port ID Set to corresponding UNI port " ::= { controlledMulticastUserAuthorityEntry 3 } multicastPackageList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..250)) MAX-ACCESS read-create STATUS current DESCRIPTION " 可控组播组列表. 用法类似于cmProxyList,每个bit对应于cmIndex" ::= { controlledMulticastUserAuthorityEntry 4 } igmpGlobalBW OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " IGMP全局带宽池大小 - 该端口支持的最大组播带宽 单位：kbps" ::= { controlledMulticastUserAuthorityEntry 5 } igmpGlobalBWUsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " IGMP全局带宽池当前使用大小 - 该端口当前实际使用的组播带宽 单位：kbps" ::= { controlledMulticastUserAuthorityEntry 6 } cmUserAuthorityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { controlledMulticastUserAuthorityEntry 7 } controlledMulticastPackageTable OBJECT-TYPE SYNTAX SEQUENCE OF ControlledMulticastPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 可控组播业务包表" ::= { controllededMulticastTable 2 } controlledMulticastPackageEntry OBJECT-TYPE SYNTAX ControlledMulticastPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { cmIndex } ::= { controlledMulticastPackageTable 1 } ControlledMulticastPackageEntry ::= SEQUENCE { cmIndex INTEGER, cmName OCTET STRING, cmProxyList OCTET STRING, multicastUserAuthority INTEGER, maxRequestChannelNum INTEGER, singlePreviewTime INTEGER, totalPreviewTime INTEGER, previewResetTime INTEGER, previewCount INTEGER, cmRowStatus RowStatus } cmIndex OBJECT-TYPE SYNTAX INTEGER (1..2000) MAX-ACCESS not-accessible STATUS current DESCRIPTION " 该可控组播业务包的索引(流水号)" ::= { controlledMulticastPackageEntry 1 } cmName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION " 该可控组播业务包名称" ::= { controlledMulticastPackageEntry 2 } cmProxyList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..250)) MAX-ACCESS read-create STATUS current DESCRIPTION " 该可控组播业务包支持的Proxy列表 采用类似INTERNET比特顺序,从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0,bit1,...,bit7。 按照bit和OCTET由小到大的顺序,每个bit对应于igmpProxyParaTable中的 一个proxyIndex,如果bit置位,表示该proxyIndex支持,否则不支持。 举例来说,如果规划了80个频道,proxyIndex范围为1..80,用10个字节表示 proxy列表,假设该PON口只支持频道列表1,15,38,对应的cmProxyList可以 设置成0x80 02 00 00 04 00 00 00 00 00" ::= { controlledMulticastPackageEntry 3 } multicastUserAuthority OBJECT-TYPE SYNTAX INTEGER { permit(1), preview(2), deny(3) } MAX-ACCESS read-create STATUS current DESCRIPTION " 用户权限(permit、preview、deny)" ::= { controlledMulticastPackageEntry 4 } maxRequestChannelNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 最大允许请求频道数" ::= { controlledMulticastPackageEntry 5 } singlePreviewTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " 单次预览时长,单位：秒" ::= { controlledMulticastPackageEntry 6 } totalPreviewTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " 预览总时长,单位：秒" ::= { controlledMulticastPackageEntry 7 } previewResetTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " 预览复位时间,单位：秒" ::= { controlledMulticastPackageEntry 8 } previewCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 预览次数" ::= { controlledMulticastPackageEntry 9 } cmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { controlledMulticastPackageEntry 10 } igmpOnuUniTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpOnuUniEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of igmpOnuUniTable entries. " ::= { igmpManagementObjects 5 } igmpOnuUniEntry OBJECT-TYPE SYNTAX IgmpOnuUniEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The igmpOnuUniEntry Information" INDEX { uniMvlanDeviceIndex,uniMvlanCardIndex,uniMvlanPortIndex } ::={ igmpOnuUniTable 1 } IgmpOnuUniEntry::= SEQUENCE { uniMvlanDeviceIndex EponDeviceIndex, uniMvlanCardIndex EponCardIndex, uniMvlanPortIndex EponPortIndex, uniMvlanVid OCTET STRING, uniMaxMultiNum INTEGER, uniMvlanTag INTEGER, uniMvlanRowstatus INTEGER } uniMvlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引 " ::= { igmpOnuUniEntry 1 } uniMvlanCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引" ::= { igmpOnuUniEntry 2 } uniMvlanPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS read-create STATUS current DESCRIPTION "端口索引" ::= { igmpOnuUniEntry 3 } uniMvlanVid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "索引(uni端口中的mvlan(1..4084)),两个字节的值表示一个VLAN ID,一个UNI端口只配置8个VLAN" ::= { igmpOnuUniEntry 4 } uniMaxMultiNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "最大组播数" ::= { igmpOnuUniEntry 5 } uniMvlanTag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "是否剥离,0：剥离 1：不剥离" ::= { igmpOnuUniEntry 6 } uniMvlanRowstatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "行状态" ::= { igmpOnuUniEntry 7 } igmpOltMulticastVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpOltMulticastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT 组播VLAN表" ::= { igmpManagementObjects 6 } igmpOltMulticastVlanEntry OBJECT-TYPE SYNTAX IgmpOltMulticastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { igmpOltMulticastVlanDeviceIndex, multicastVlanId } ::= { igmpOltMulticastVlanTable 1 } IgmpOltMulticastVlanEntry ::= SEQUENCE { igmpOltMulticastVlanDeviceIndex INTEGER, multicastVlanId INTEGER, mVlanMaxQueryResponseTime INTEGER, mVlanRobustVariable INTEGER, mVlanQueryInterval INTEGER, mVlanLastMemberQueryInterval INTEGER, mVlanLastMemberQueryCount INTEGER, mvlanRowstatus INTEGER } igmpOltMulticastVlanDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 OLT device index" ::= { igmpOltMulticastVlanEntry 1 } multicastVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " OLT 组播VLAN ID " ::= { igmpOltMulticastVlanEntry 2 } mVlanMaxQueryResponseTime OBJECT-TYPE SYNTAX INTEGER UNITS "tenth second" MAX-ACCESS read-write STATUS optional DESCRIPTION " 最大响应查询时间 单位：1/10秒 This is used for sending general query" ::= { igmpOltMulticastVlanEntry 3 } mVlanRobustVariable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS optional DESCRIPTION " 健壮性变量 This is used for sending general query No less than 1" ::= { igmpOltMulticastVlanEntry 4 } mVlanQueryInterval OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-write STATUS optional DESCRIPTION " 发送查询报文的时间间隔 单位：秒 This is used for sending general query " ::= { igmpOltMulticastVlanEntry 5 } mVlanLastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER UNITS "tenth second" MAX-ACCESS read-write STATUS optional DESCRIPTION " Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages " ::= { igmpOltMulticastVlanEntry 6 } mVlanLastMemberQueryCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS optional DESCRIPTION " Number of Group-Specific Queries sent before the router assumes there are no local members " ::= { igmpOltMulticastVlanEntry 7 } mvlanRowstatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "行状态" ::= { igmpOltMulticastVlanEntry 8 } igmpSniMulticastVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpSniMulticastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNI端口组播VLAN表" ::= { igmpManagementObjects 7 } igmpSniMulticastVlanEntry OBJECT-TYPE SYNTAX IgmpSniMulticastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The igmpSniMulticastVlanEntry Information" INDEX { sniMultiVlanVid,sniMultiVlanDeviceIndex } ::={ igmpSniMulticastVlanTable 1 } IgmpSniMulticastVlanEntry ::= SEQUENCE { sniMultiVlanVid INTEGER, sniMultiVlanDeviceIndex EponDeviceIndex, sniMultiVlanRowstatus INTEGER } sniMultiVlanVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " SNI端口组播VLAN号" ::= { igmpSniMulticastVlanEntry 1 } sniMultiVlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNI设备索引,device/slot/sni port " ::= { igmpSniMulticastVlanEntry 2 } sniMultiVlanRowstatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "行状态" ::= { igmpSniMulticastVlanEntry 3 } onuIgmpModeTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuIgmpModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ONU组播模式表" ::= { igmpManagementObjects 8 } onuIgmpModeEntry OBJECT-TYPE SYNTAX OnuIgmpModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuIgmpModeEntry Information" INDEX { onuIgmpModeDeviceIndex } ::={ onuIgmpModeTable 1 } OnuIgmpModeEntry ::= SEQUENCE { onuIgmpModeDeviceIndex EponDeviceIndex, onuIgmpMode INTEGER } onuIgmpModeDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ONU ID " ::= { onuIgmpModeEntry 1 } onuIgmpMode OBJECT-TYPE SYNTAX INTEGER{ disable(1), snooping(2), controlledMulticast(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " ONU组播模式 默认组播是snooping(2)模式 " DEFVAL { snooping} ::= { onuIgmpModeEntry 2 } -------------------------------------------------------------------------------- -- vlanManagementObjects [VLAN管理项](1.3.6.1.4.1.17409.2.3.7) -------------------------------------------------------------------------------- vlanGlobalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanGlobalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 全局VLAN信息表" ::= { vlanManagementObjects 1 } vlanGlobalInfoEntry OBJECT-TYPE SYNTAX VlanGlobalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { vlanDeviceIndex } ::= { vlanGlobalInfoTable 1 } VlanGlobalInfoEntry ::= SEQUENCE { vlanDeviceIndex EponDeviceIndex, maxVlanId INTEGER, maxSupportVlans INTEGER, createdVlanNumber INTEGER } vlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 For OLT Agent, set to corresponding device ID For ONU Agent, set to 0" ::= { vlanGlobalInfoEntry 1 } maxVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 最大VLAN ID" ::= { vlanGlobalInfoEntry 2 } maxSupportVlans OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 最大支持的VLAN个数" ::= { vlanGlobalInfoEntry 3 } createdVlanNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 已创建的VLAN个数" ::= { vlanGlobalInfoEntry 4 } vlanConfigGroup OBJECT-IDENTITY STATUS current DESCRIPTION " Vlan配置组" ::= { vlanManagementObjects 2 } oltVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OltVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT VLAN成员配置表" ::= { vlanConfigGroup 1 } oltVlanConfigEntry OBJECT-TYPE SYNTAX OltVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { oltVlanIndex, oltVlanDeviceIndex} ::= { oltVlanConfigTable 1 } OltVlanConfigEntry ::= SEQUENCE { oltVlanIndex INTEGER, oltVlanDeviceIndex INTEGER, oltVlanName OCTET STRING, taggedPort OCTET STRING, untaggedPort OCTET STRING, oltVlanRowStatus RowStatus } oltVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " Vlan索引号" ::= { oltVlanConfigEntry 1 } oltVlanDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 " ::= { oltVlanConfigEntry 2 } oltVlanName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " OLT VLAN name" ::= { oltVlanConfigEntry 3 } taggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的tag的PON/SNI in OLT。 It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 " ::= { oltVlanConfigEntry 4 } untaggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的Untag的PON/SNI in OLT。 It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 " ::= { oltVlanConfigEntry 5 } oltVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { oltVlanConfigEntry 6 } onuVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ONU VLAN成员配置表 " ::= { vlanConfigGroup 2 } onuVlanConfigEntry OBJECT-TYPE SYNTAX OnuVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { onuVlanIndex,onuVlanDeviceIndex } ::= { onuVlanConfigTable 1 } OnuVlanConfigEntry ::= SEQUENCE { onuVlanIndex INTEGER, onuVlanDeviceIndex EponDeviceIndex, onuVlanName OCTET STRING, onuVlanTaggedPort OCTET STRING, onuVlanUntaggedPort OCTET STRING, onuVlanRowStatus RowStatus } onuVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " Vlan索引号" ::= { onuVlanConfigEntry 1 } onuVlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " ONU设备索引号" ::= { onuVlanConfigEntry 2 } onuVlanName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " ONU VLAN name" ::= { onuVlanConfigEntry 3 } onuVlanTaggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的tag的UNI端口。 It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of tagged member ports in the VLAN. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the tagged member ports of the VLAN, then the object is presented as: 01 02 03 04 " ::= { onuVlanConfigEntry 4 } onuVlanUntaggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的Untag的UNI端口。 It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of untagged member ports in the VLAN. If the ONU is fixed (not modulized), set slot ID to FF, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the untagged member ports of the VLAN, then the object is presented as: 01 02 03 04 " ::= { onuVlanConfigEntry 5 } onuVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { onuVlanConfigEntry 6 } portVlanGroup OBJECT-IDENTITY STATUS current DESCRIPTION " 端口Vlan组(sni、uni、ponport)" ::= { vlanManagementObjects 3 } onuPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan表 This table applies on ONU UNI. 1. If the table is maintained in OLT device(OLT作为SNMP Agent): Applied Obj - Descriptions of Index ------------------------------------------------------------------ ONU UNI - Set pvlanDeviceIndex to corresponding ONU ID, pvlanCardIndex, and pvlanPortIndex set to the corresponding value 2. If the table is maintained in ONU device(ONU作为SNMP Agent): pvlanDeviceIndex shall be set to 0 to indicate meaningless. pvlanCardIndex shall be set to corresponding slot. pvlanPortIndex shall be set to corresponding port. " ::= { portVlanGroup 1 } onuPortVlanEntry OBJECT-TYPE SYNTAX OnuPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pvlanDeviceIndex, pvlanCardIndex, pvlanPortIndex} ::= { onuPortVlanTable 1 } OnuPortVlanEntry ::= SEQUENCE { pvlanDeviceIndex EponDeviceIndex, pvlanCardIndex EponCardIndex, pvlanPortIndex EponPortIndex, vlanTagTpid OCTET STRING, vlanTagCfi TruthValue, vlanTagPriority INTEGER, vlanPVid INTEGER, vlanMode INTEGER } pvlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT/ONU设备索引号。" ::= { onuPortVlanEntry 1 } pvlanCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 " ::= { onuPortVlanEntry 2 } pvlanPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号 " ::= { onuPortVlanEntry 3 } vlanTagTpid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-write STATUS current DESCRIPTION " 标记的协议标识 It shall be presented in hexadecimal format. For example, 81 00 to indicate 0x8100" ::= { onuPortVlanEntry 4 } vlanTagCfi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 规则格式指示符" ::= { onuPortVlanEntry 5 } vlanTagPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " vlan优先级" ::= { onuPortVlanEntry 6 } vlanPVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " port Vlan ID" ::= { onuPortVlanEntry 7 } vlanMode OBJECT-TYPE SYNTAX INTEGER { transparent(0), tag(1), translation(2), aggregation(3), trunk(4), stacking(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " vlan模式 " ::= { onuPortVlanEntry 8 } portVlanTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan翻译表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device(OLT作为SNMP Agent): Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0, /OLT SNI pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless OLT onu ID - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless ONU UNI - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to the corresponding value 2. If the table is maintained in ONU device(ONU作为SNMP Agent): pvtDeviceIndex shall be set to 0 to indicate meaningless. pvtCardIndex shall be set to corresponding slot. pvtPortIndex shall be set to corresponding port. " ::= { portVlanGroup 2 } portVlanTranslationEntry OBJECT-TYPE SYNTAX PortVlanTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pvtDeviceIndex , pvtCardIndex , pvtPortIndex , portVidIndex } ::= { portVlanTranslationTable 1 } PortVlanTranslationEntry ::= SEQUENCE { pvtDeviceIndex EponDeviceIndex, pvtCardIndex EponCardIndex, pvtPortIndex EponPortIndex, portVidIndex Unsigned32, translationNewVid Unsigned32, translationRowStatus RowStatus } pvtDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT/ONU设备索引号。" ::= { portVlanTranslationEntry 1 } pvtCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portVlanTranslationEntry 2 } pvtPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号" ::= { portVlanTranslationEntry 3 } portVidIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口原始VLAN ID索引号" ::= { portVlanTranslationEntry 4 } translationNewVid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION " 翻译的新vlan号" ::= { portVlanTranslationEntry 5 } translationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态 " ::= { portVlanTranslationEntry 6 } portVlanAggregationManagement OBJECT-IDENTITY STATUS current DESCRIPTION " 端口Vlan聚合管理(VLAN Aggregation)" ::= { portVlanGroup 3 } portVlanAggregationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanAggregationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan聚合配置表 This table applies on OLT pon port, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device(OLT作为SNMP Agent): Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvaDeviceIndex shall be set to 0, pvaCardIndex, and pvaPortIndex set to 0 indicates meaningless OLT onu ID - Set pvaDeviceIndex to corresponding ONU ID, pvaCardIndex, and pvaPortIndex set to 0 indicates meaningless ONU UNI - Set pvaDeviceIndex to corresponding ONU ID, pvaCardIndex, and pvaPortIndex set to the corresponding value 2. If the table is maintained in ONU device(ONU作为SNMP Agent): pvaDeviceIndex shall be set to 0 to indicate meaningless. pvaCardIndex shall be set to corresponding slot. pvaPortIndex shall be set to corresponding port. " ::= { portVlanAggregationManagement 1 } portVlanAggregationConfigEntry OBJECT-TYPE SYNTAX PortVlanAggregationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pvaDeviceIndex , pvaCardIndex , pvaPortIndex , portAggregationVidIndex } ::= { portVlanAggregationConfigTable 1 } PortVlanAggregationConfigEntry ::= SEQUENCE { pvaDeviceIndex EponDeviceIndex, pvaCardIndex EponCardIndex, pvaPortIndex EponPortIndex, portAggregationVidIndex Unsigned32, aggregationVidList OCTET STRING, aggregationRowStatus RowStatus } pvaDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT/ONU设备索引号。" ::= { portVlanAggregationConfigEntry 1 } pvaCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portVlanAggregationConfigEntry 2 } pvaPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号" ::= { portVlanAggregationConfigEntry 3 } portAggregationVidIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口VLAN聚合组VLAN号" ::= { portVlanAggregationConfigEntry 4 } aggregationVidList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (512)) MAX-ACCESS read-create STATUS current DESCRIPTION " 聚合的vlan ID组 采用类似INTERNET比特顺序,从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0,bit1,...,bit7。 按照bit和OCTET由小到大的顺序,每个bit对应于一个VLAN,VLAN ID范围为0..4095。 第一个bit对应VLAN 0,最后一个bit对应VLAN 4095。 如果bit置位,表示该包括该VLAN,否则不包括。" ::= { portVlanAggregationConfigEntry 5 } aggregationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { portVlanAggregationConfigEntry 6 } portVlanTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan trunk表(VLAN Trunk表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device(OLT作为SNMP Agent): Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0, /OLT SNI pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless OLT onu ID - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless ONU UNI - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to the corresponding value 2. If the table is maintained in ONU device(ONU作为SNMP Agent): pvtDeviceIndex shall be set to 0 to indicate meaningless. pvtCardIndex shall be set to corresponding slot. pvtPortIndex shall be set to corresponding port. " ::= { portVlanGroup 4 } portVlanTrunkEntry OBJECT-TYPE SYNTAX PortVlanTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { trunkDeviceIndex, trunkCardIndex, trunkPortIndex } ::= { portVlanTrunkTable 1 } PortVlanTrunkEntry ::= SEQUENCE { trunkDeviceIndex EponDeviceIndex, trunkCardIndex EponCardIndex, trunkPortIndex EponPortIndex, trunkVidList OCTET STRING, portVlanTrunkRowStatus RowStatus } trunkDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 " ::= { portVlanTrunkEntry 1 } trunkCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portVlanTrunkEntry 2 } trunkPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号" ::= { portVlanTrunkEntry 3 } trunkVidList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (512)) MAX-ACCESS read-create STATUS current DESCRIPTION " Trunked Vlan List for the port 数据行数为端口数量,vlan存储为一个4096位二进制,通过在第n位标记为1,表示vlan n在此端口透传。 采用类似INTERNET比特顺序,从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0,bit1,...,bit7。 按照bit和OCTET由小到大的顺序,每个bit对应于一个VLAN,VLAN ID范围为0..4095。 第一个bit对应VLAN 0,最后一个bit对应VLAN 4095。 如果bit置位,表示该包括该VLAN,否则不包括。 " ::= { portVlanTrunkEntry 4 } portVlanTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { portVlanTrunkEntry 5 } oltPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF OltPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " SNI/PON端口Vlan表 This table applies on OLT pon port, OLT SNI Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port/OLT SNI - OnuNum of pvlanDeviceIndex shall be set to 0 " ::= { portVlanGroup 5 } oltPortVlanEntry OBJECT-TYPE SYNTAX OltPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { oltPortVlanDeviceIndex } ::= { oltPortVlanTable 1 } OltPortVlanEntry ::= SEQUENCE { oltPortVlanDeviceIndex EponDeviceIndex, oltPortVlanTagPriority INTEGER, oltPortVlanPVid INTEGER, oltPortVlanMode INTEGER } oltPortVlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " SNI/PON port " ::= { oltPortVlanEntry 1 } oltPortVlanTagPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " vlan优先级" ::= { oltPortVlanEntry 2 } oltPortVlanPVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " port Vlan ID" ::= { oltPortVlanEntry 3 } oltPortVlanMode OBJECT-TYPE SYNTAX INTEGER { trunk(1), access(2), hybird(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " vlan模式 " ::= { oltPortVlanEntry 4 } qinQConfigGroup OBJECT-IDENTITY STATUS current DESCRIPTION " QinQ配置组 备注：要求OLT/ONU均支持QINQ,OLT可选,ONU必选" ::= { vlanManagementObjects 4 } portQinQConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PortQinQConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " QinQ配置属性表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device(OLT作为SNMP agent): Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pqDeviceIndex shall be set to 0, /OLT SNI pqCardIndex, and pqPortIndex set to 0 indicates meaningless OLT onu ID - Set pqDeviceIndex to corresponding ONU ID, pqCardIndex, and pqPortIndex set to 0 indicates meaningless ONU UNI - Set pqDeviceIndex to corresponding ONU ID, pqCardIndex, and pqPortIndex set to the corresponding value 2. If the table is maintained in ONU device(ONU作为SNMP agent): pqDeviceIndex shall be set to 0 to indicate meaningless. pqCardIndex shall be set to corresponding slot. pqPortIndex shall be set to corresponding port. " ::= { qinQConfigGroup 1 } portQinQConfigEntry OBJECT-TYPE SYNTAX PortQinQConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pqDeviceIndex, pqCardIndex, pqPortIndex, pqStartVlanId, pqEndVlanId } ::= { portQinQConfigTable 1 } PortQinQConfigEntry ::= SEQUENCE { pqDeviceIndex EponDeviceIndex, pqCardIndex EponCardIndex, pqPortIndex EponPortIndex, pqStartVlanId INTEGER, pqEndVlanId INTEGER, pqSVlanId INTEGER, pqSTagCosDetermine INTEGER, pqSTagCosNewValue INTEGER, pqRowStatus RowStatus } pqDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号" ::= { portQinQConfigEntry 1 } pqCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portQinQConfigEntry 2 } pqPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号" ::= { portQinQConfigEntry 3 } pqStartVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " The starting VLAN ID, working together with pqEndVlanId, consists of a VLAN group. The VLAN ID match the VLAN group will be QinQed with specified outer VLAN " ::= { portQinQConfigEntry 4 } pqEndVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " The ending VLAN ID, working together with pqStartVlanId, consists of a VLAN range. The VLAN ID match the VLAN range will be QinQed with specified outer VLAN " ::= { portQinQConfigEntry 5 } pqSVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " The outer VLAN id to be QinQed" ::= { portQinQConfigEntry 6 } pqSTagCosDetermine OBJECT-TYPE SYNTAX INTEGER { redefine(1), copyFromCTag(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " What STAG COS will be set for this QinQ instance. It could be either a new definition or copied from CTAG " ::= { portQinQConfigEntry 7 } pqSTagCosNewValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION " The new STAG COS value if pqSTagCosDetermine is selected as redefine(1) " DEFVAL { 0 } ::= { portQinQConfigEntry 8 } pqRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " " ::= { portQinQConfigEntry 9 } -------------------------------------------------------------------------------- -- qosManagementObjects[ Qos管理项](1.3.6.1.4.1.17409.2.3.8) -------------------------------------------------------------------------------- qosGlobalSetTable OBJECT-TYPE SYNTAX SEQUENCE OF QosGlobalSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Global QoS parameters." ::= { qosManagementObjects 1 } qosGlobalSetEntry OBJECT-TYPE SYNTAX QosGlobalSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { qosGlobalSetDeviceIndex } ::= { qosGlobalSetTable 1 } QosGlobalSetEntry ::= SEQUENCE { qosGlobalSetDeviceIndex EponDeviceIndex, qosGlobalSetMaxQueueCount INTEGER, qosGlobalSetMode INTEGER } qosGlobalSetDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT Agent- Set to corresponding device For ONU Agent - Set to 0 " ::= { qosGlobalSetEntry 1 } qosGlobalSetMaxQueueCount OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION " 最大队列数,该设备支持的最大队列数。如果最大队列数为8,则队列编号为0-7。" ::= { qosGlobalSetEntry 2 } qosGlobalSetMode OBJECT-TYPE SYNTAX INTEGER { deviceBased(1), portBased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Define how to set QoS parameter deviceBased(1) - When set, only the table started with deviceBase is applicable portBased(2) - When set, only the table started with portBase is applicable " ::= { qosGlobalSetEntry 3 } deviceBaseQosMapTable OBJECT-TYPE SYNTAX SEQUENCE OF DeviceBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Deviced based setting. It is used to define how to map QoS options to queue" ::= { qosManagementObjects 2 } deviceBaseQosMapEntry OBJECT-TYPE SYNTAX DeviceBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { deviceBaseQosMapDeviceIndex, deviceBaseQosMapRuleIndex } ::= { deviceBaseQosMapTable 1 } DeviceBaseQosMapEntry ::= SEQUENCE { deviceBaseQosMapDeviceIndex EponDeviceIndex, deviceBaseQosMapRuleIndex INTEGER, deviceBaseQosMapOctet OCTET STRING } deviceBaseQosMapDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT Agent - Set to corresponding device/slot/port For ONU Agent - Set to 0 " ::= { deviceBaseQosMapEntry 1 } deviceBaseQosMapRuleIndex OBJECT-TYPE SYNTAX INTEGER { cos(1), tos(2), diffserv(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " 映射规则编号" ::= { deviceBaseQosMapEntry 2 } deviceBaseQosMapOctet OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8 | 64)) MAX-ACCESS read-write STATUS current DESCRIPTION " 映射值。 长度为8字节,或64字节。每字节表示一个映射关系。 队列编号不能超过对应的qosGlobalSetMaxQueueCount值,如果qosGlobalSetMaxQueueCount为8,则队列编号为0-7。 对于 cos,长度为 8字节,每个字节分别表示cos0-7 映射到的队列编号。 对于 tos,长度为 16字节,每个字节分别表示tos0-15 映射到的队列编号。 对于 diffserv,长度为64字节,每个字节分别表示diffserv0-63映射到的队列编号。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04) 则映射关系为： cos 0 -> queue 0 cos 1 -> queue 0 cos 2 -> queue 1 cos 3 -> queue 2 cos 4 -> queue 3 cos 5 -> queue 3 cos 6 -> queue 4 cos 7 -> queue 4 " ::= { deviceBaseQosMapEntry 3 } deviceBaseQosPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF DeviceBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Deviced based setting It is used to define QoS specification" ::= { qosManagementObjects 3 } deviceBaseQosPolicyEntry OBJECT-TYPE SYNTAX DeviceBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { deviceBaseQosPolicyDeviceIndex } ::= { deviceBaseQosPolicyTable 1 } DeviceBaseQosPolicyEntry ::= SEQUENCE { deviceBaseQosPolicyDeviceIndex EponDeviceIndex, deviceBaseQosPolicyMode INTEGER, deviceBaseQosPolicyWeightOctet OCTET STRING, deviceBaseQosPolicySpBandwidthRange OCTET STRING } deviceBaseQosPolicyDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT Agent - Set to corresponding device/slot/port For ONU Agent - Set to 0 " ::= { deviceBaseQosPolicyEntry 1 } deviceBaseQosPolicyMode OBJECT-TYPE SYNTAX INTEGER { sp(1), wrr(2), spWrr(3), wfp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 调度模式" ::= { deviceBaseQosPolicyEntry 2 } deviceBaseQosPolicyWeightOctet OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " 权重值。 长度等于队列数目,每字节表示一个队列的权重。 对于 sp,读写该节点无意义,读时始终为全0。 对于 wrr,每字节描述一个队列的权重。权重的范围为1-100,全部队列权重之和应等于100。 对于 spWrr,每字节描述一个队列的权重。权重范围为0-100,权重为0表示该队列用sp模式,权重值非0的队列权重之和应等于100。 对于 wfp,读写该节点无意义,读时始终为全0。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2) get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30) 说明：共8个队列 queue 0 权重为 5 queue 1 权重为 5 queue 2 权重为 5 queue 3 权重为 5 queue 4 权重为 10 queue 5 权重为 20 queue 6 权重为 20 queue 7 权重为 30 " ::= { deviceBaseQosPolicyEntry 3 } deviceBaseQosPolicySpBandwidthRange OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " Define SP assured bandwidth for each queue. The size of this object is 4*(number of queue). For each queue, use 4 octets to represend the assured bandwidth for the queue. The four-octet could be mapped to an unsigned integer, in units of kbps. The sequence of the map is from queue 0 to queue max (for example, 7). For example, 00 00 00 10 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 01 00 01 01 00 00 00 11 11 It means, 8 queues and the assured bandwidth for each queue as: queue 0 16kbps queue 1 256kbps queue 2 0 queue 3 0 queue 4 4096kbps queue 5 1kbps queue 6 65792kbps queue 7 65535kbps " ::= { deviceBaseQosPolicyEntry 4 } portBaseQosMapTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { qosManagementObjects 4 } portBaseQosMapEntry OBJECT-TYPE SYNTAX PortBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { portBaseQosMapDeviceIndex, portBaseQosMapCardIndex, portBaseQosMapPortIndex, portBaseQosMapRuleIndex } ::= { portBaseQosMapTable 1 } PortBaseQosMapEntry ::= SEQUENCE { portBaseQosMapDeviceIndex EponDeviceIndex, portBaseQosMapCardIndex EponPortIndex, portBaseQosMapPortIndex EponPortIndex, portBaseQosMapRuleIndex INTEGER, portBaseQosMapOctet OCTET STRING } portBaseQosMapDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT Agent, set to corresponding SNI port or PON port For ONU Agent, set to 0 " ::= { portBaseQosMapEntry 1 } portBaseQosMapCardIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding slot " ::= { portBaseQosMapEntry 2 } portBaseQosMapPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引 For OLT Agent, set to 0 For ONU Agent, set to corresponding port " ::= { portBaseQosMapEntry 3 } portBaseQosMapRuleIndex OBJECT-TYPE SYNTAX INTEGER { cos(1), tos(2), diffserv(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " 映射规则编号" ::= { portBaseQosMapEntry 4 } portBaseQosMapOctet OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " 映射值。 长度为8字节,或64字节。每字节表示一个映射关系。 队列编号不能超过对应的qosGlobalSetMaxQueueCount值,如果qosGlobalSetMaxQueueCount为8,则队列编号为0-7。 对于 cos,长度为 8字节,每个字节分别表示cos0-7 映射到的队列编号。 对于 tos,长度为 16字节,每个字节分别表示tos0-16 映射到的队列编号。 对于 diffserv,长度为64字节,每个字节分别表示diffserv0-64映射到的队列编号。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04) 则映射关系为： cos 0 -> queue 0 cos 1 -> queue 0 cos 2 -> queue 1 cos 3 -> queue 2 cos 4 -> queue 3 cos 5 -> queue 3 cos 6 -> queue 4 cos 7 -> queue 4 " ::= { portBaseQosMapEntry 5 } portBaseQosPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { qosManagementObjects 5 } portBaseQosPolicyEntry OBJECT-TYPE SYNTAX PortBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { portBaseQosPolicyDeviceIndex, portBaseQosPolicyCardIndex, portBaseQosPolicyPortIndex } ::= { portBaseQosPolicyTable 1 } PortBaseQosPolicyEntry ::= SEQUENCE { portBaseQosPolicyDeviceIndex EponDeviceIndex, portBaseQosPolicyCardIndex EponPortIndex, portBaseQosPolicyPortIndex EponPortIndex, portBaseQosPolicyMode INTEGER, portBaseQosPolicyWeightOctet OCTET STRING, portBaseQosPolicySpBandwidthRange OCTET STRING } portBaseQosPolicyDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT Agent, set to corresponding SNI port or PON port For ONU Agent, set to 0 " ::= { portBaseQosPolicyEntry 1 } portBaseQosPolicyCardIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding slot " ::= { portBaseQosPolicyEntry 2 } portBaseQosPolicyPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引 For OLT Agent, set to 0 For ONU Agent, set to corresponding port " ::= { portBaseQosPolicyEntry 3 } portBaseQosPolicyMode OBJECT-TYPE SYNTAX INTEGER { sp(1), wrr(2), spWrr(3), wfp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 调度模式 sp 严格优先级 wrr 加权轮循 spWrr sp+wrr混合 wfp 加权公平排队" ::= { portBaseQosPolicyEntry 4 } portBaseQosPolicyWeightOctet OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION " 权重值 长度等于队列数目,每字节表示一个队列的权重。 对于 sp,读写该节点无意义,读时始终为全0。 对于 wrr,每字节描述一个队列的权重。权重的范围为1-100,全部队列权重之和应等于100。 对于 spWrr,每字节描述一个队列的权重。权重范围为0-100,权重为0表示该队列用sp模式,权重值非0的队列权重之和应等于100。 对于 wfp,读写该节点无意义,读时始终为全0。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.4.1.2.portBaseQosPolicyDeviceIndex(410100101). = wrr(2) get 1.3.6.1.4.1.17409.2.3.8.4.1.3.portBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30) 说明：共8个队列 queue 0 权重为 5 queue 1 权重为 5 queue 2 权重为 5 queue 3 权重为 5 queue 4 权重为 10 queue 5 权重为 20 queue 6 权重为 20 queue 7 权重为 30 " ::= { portBaseQosPolicyEntry 5 } portBaseQosPolicySpBandwidthRange OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " Sp+wrr模式下使用 Define SP assured bandwidth for each queue. The size of this object is 4*(number of queue). For each queue, use 4 octets to represend the assured bandwidth for the queue. The four-octet could be mapped to an unsigned integer, in units of kbps. The sequence of the map is from queue 0 to queue max (for example, 7). For example, 00 00 00 10 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 01 00 01 01 00 00 00 11 11 It means, 8 queues and the assured bandwidth for each queue as: queue 0 16kbps queue 1 256kbps queue 2 0 queue 3 0 queue 4 4096kbps queue 5 1kbps queue 6 65792kbps queue 7 65535kbps " ::= { portBaseQosPolicyEntry 6 } -------------------------------------------------------------------------------- -- stpManagementObjects[STP管理项](1.3.6.1.4.1.17409.2.3.9) -------------------------------------------------------------------------------- stpGlobalSetTable OBJECT-TYPE SYNTAX SEQUENCE OF StpGlobalSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " STP全局表" ::= { stpManagementObjects 1 } stpGlobalSetEntry OBJECT-TYPE SYNTAX StpGlobalSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { stpGlobalSetIndex } ::= { stpGlobalSetTable 1 } StpGlobalSetEntry ::= SEQUENCE { stpGlobalSetIndex EponDeviceIndex, stpGlobalSetVersion INTEGER, stpGlobalSetPriority INTEGER, stpGlobalSetTimeSinceTopologyChange TimeTicks, stpGlobalSetTopChanges Counter32, stpGlobalSetDesignatedRoot BridgeId, stpGlobalSetRootCost INTEGER, stpGlobalSetRootPort OCTET STRING, stpGlobalSetMaxAge Timeout, stpGlobalSetHelloTime Timeout, stpGlobalSetHoldTime INTEGER, stpGlobalSetForwardDelay Timeout, stpGlobalSetBridgeMaxAge Timeout, stpGlobalSetBridgeHelloTime Timeout, stpGlobalSetBridgeForwardDelay Timeout, stpGlobalSetRstpTxHoldCount INTEGER, stpGlobalSetEnable TruthValue } stpGlobalSetIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 索引号 For OLT Agent - Set to corresponding device For ONU Agent - Set to 0 " ::= { stpGlobalSetEntry 1 } stpGlobalSetVersion OBJECT-TYPE SYNTAX INTEGER { rstp(1), stp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 生成树协议版本。" DEFVAL { rstp } ::= { stpGlobalSetEntry 2 } stpGlobalSetPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " 优先级。 在支持IEEE 802.1d或者IEEE 802.1w的网桥上,取值范围是0-61440,步长是4096。" ::= { stpGlobalSetEntry 3 } stpGlobalSetTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " 变更时间,网桥实体检测到最近一次拓扑改变之后经历的时间。" ::= { stpGlobalSetEntry 4 } stpGlobalSetTopChanges OBJECT-TYPE SYNTAX Counter32 UNITS "topology changes" MAX-ACCESS read-only STATUS current DESCRIPTION " 变更次数,网桥重启或初始化化拓扑的变更次数。" ::= { stpGlobalSetEntry 5 } stpGlobalSetDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION " 根桥,指定根桥的BridgeId。" ::= { stpGlobalSetEntry 6 } stpGlobalSetRootCost OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 根路径开销,网桥到根桥的路径消耗。" ::= { stpGlobalSetEntry 7 } stpGlobalSetRootPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-only STATUS current DESCRIPTION " 根端口,是连接本网桥和根网桥的端口,它提供的路径消耗最小 The port is presented by three octets, in sequence of device ID, slot, and port. For ONU Agent, device ID is meaningless and shall set 0. Slot and port shall be set to corresponding value. For OLT Agent, device ID, slot, and port shall be set to corresponding value. For example, 01 02 03 means device 1, slot 2, port 3 is root port. 0x00 04 05 means ONU slot 4, port 5 is root port. " ::= { stpGlobalSetEntry 8 } stpGlobalSetMaxAge OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " 老化时间,端口从网络中学习到的生成树协议信息的老化时间,单位：1/100 secs。" ::= { stpGlobalSetEntry 9 } stpGlobalSetHelloTime OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " 报文发送间隔,网桥在任意端口发送配置网桥PDU的时间间隔。" ::= { stpGlobalSetEntry 10 } stpGlobalSetHoldTime OBJECT-TYPE SYNTAX INTEGER UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " 维持时间,在这个时间间隔内,本网桥不会发送两个以上配置网桥PDU。" ::= { stpGlobalSetEntry 11 } stpGlobalSetForwardDelay OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " 转换时延,控制一个端口多快地改变自己的生成状态,决定了本端口开始转发前,在监听状态和学习状态滞留多长时间。 当一个发现一个拓扑变更,并且正在处理时,这个值也用来控制动态过滤表的老化时间。 " ::= { stpGlobalSetEntry 12 } stpGlobalSetBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " 如果本网桥是根网桥,那么所有网桥把这个值用作老化时间。" ::= { stpGlobalSetEntry 13 } stpGlobalSetBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..1000) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " 如果本网桥是根网桥,那么所有网桥把这个值用作报文发送的时间间隔。" ::= { stpGlobalSetEntry 14 } stpGlobalSetBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " 如果本网桥是根网桥,那么所有网桥把这个值用于转换时延。" ::= { stpGlobalSetEntry 15 } stpGlobalSetRstpTxHoldCount OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " 传输限速,对RSTP,用于限制端口的报文发送速率。" DEFVAL { 3 } ::= { stpGlobalSetEntry 16 } stpGlobalSetEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 使能状态,启用或关闭STP。true(1)为开启。" ::= { stpGlobalSetEntry 17 } stpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " STP端口表" ::= { stpManagementObjects 2 } stpPortEntry OBJECT-TYPE SYNTAX StpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { stpPortStpIndex, stpPortCardIndex, stpPortIndex } ::= { stpPortTable 1 } StpPortEntry ::= SEQUENCE { stpPortStpIndex EponDeviceIndex, stpPortCardIndex EponCardIndex, stpPortIndex EponPortIndex, stpPortStatus INTEGER, stpPortPriority INTEGER, stpPortPathCost INTEGER, stpPortDesignatedRoot BridgeId, stpPortDesignatedCost INTEGER, stpPortDesignatedBridge BridgeId, stpPortDesignatedPort Gauge32, stpPortForwardTransitions Unsigned32, stpPortRstpProtocolMigration TruthValue, stpPortRstpAdminEdgePort TruthValue, stpPortRstpOperEdgePort TruthValue, stpPortPointToPointAdminStatus INTEGER, stpPortPointToPointOperStatus TruthValue, stpPortEnabled TruthValue } stpPortStpIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 索引号。 For OLT Agent - Set to corresponding device/SLOT/PORT For ONU Agent - Set to 0 " ::= { stpPortEntry 1 } stpPortCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Epon板卡索引号 For OLT Agent, set to 0 For ONU Agent, set to correspond card index" ::= { stpPortEntry 2 } stpPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口号,对OLT为SNI/PON port,对ONU为UNI端口号。 For OLT Agent, set to 0 For ONU Agent, set to correspond port index" ::= { stpPortEntry 3 } stpPortStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } MAX-ACCESS read-only STATUS current DESCRIPTION " 端口状态,由生成树协议的应用程序定义,对于被禁用STP的端口,这个状态应该为disable。" ::= { stpPortEntry 4 } stpPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " 端口优先级" ::= { stpPortEntry 5 } stpPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION " 端口路径开销,本端口在通往生成树根的路径上增加的路径消耗802.1D-1998推荐这个参数的默认值跟连接LAN的速度成反比。" ::= { stpPortEntry 6 } stpPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION " 指定根网桥,在配置BPDU中被记录为根的网桥的标识符,这些配置BPDU由指定网桥发送,而指定网桥用于跟这个端口相连的网段。" ::= { stpPortEntry 7 } stpPortDesignatedCost OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 指定路径开销,跟本端口相连的网段的指定端口的路径消耗,这个值会跟接受到的网桥PDU中的根路径消耗字段进行比较。" ::= { stpPortEntry 8 } stpPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION " 指定网桥ID,本端口认为的本端口的网段的指定网桥的标识符。" ::= { stpPortEntry 9 } stpPortDesignatedPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " 指定端口,指定网桥上用于本端口网段的端口的标识符。" ::= { stpPortEntry 10 } stpPortForwardTransitions OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " 本端口已经从学习状态转变到转发状态的时间。" ::= { stpPortEntry 11 } stpPortRstpProtocolMigration OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 协议迁移,如果操作在RSTP模式,将这个节点设置为TRUE(1)会强制这个端口发送RSTP BPDU,读操作无意,总返回FALSE(2)。" ::= { stpPortEntry 12 } stpPortRstpAdminEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 边缘端口管理状态,指定该端口是否为边缘端口,设置该节点将导致相应的stpPortRstpOperEdgePort节点设置成同样的值。 当设置成true(1),但端口上收到一个BPDU时,stpPortRstpOperEdgePort将变成false(2)。 " ::= { stpPortEntry 13 } stpPortRstpOperEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " 边缘端口状态,这个节点被初始化成stpPortRstpAdminEdgePort的值,接收到一个BPDU时被设置成false(2)。" ::= { stpPortEntry 14 } stpPortPointToPointAdminStatus OBJECT-TYPE SYNTAX INTEGER { forceFalse(0), forceTrue(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 连接到本端口网段的点对点管理状态。" ::= { stpPortEntry 15 } stpPortPointToPointOperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " 连接到本端口网段的点对点实际状态。" ::= { stpPortEntry 16 } stpPortEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 端口使能状态,true(1)为开启。" ::= { stpPortEntry 17 } -------------------------------------------------------------------------------- -- performanceStatisticObjects[性能统计属性管理项](1.3.6.1.4.1.17409.2.3.10) -------------------------------------------------------------------------------- curStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CurStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "实时性能" ::= { performanceStatisticObjects 1 } curStatsEntry OBJECT-TYPE SYNTAX CurStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "实时性能" INDEX { curStatsDeviceIndex, curStatsCardIndex, curStatsPortIndex } ::= { curStatsTable 1 } CurStatsEntry ::= SEQUENCE { curStatsDeviceIndex EponDeviceIndex, curStatsCardIndex EponCardIndex, curStatsPortIndex EponPortIndex, curStatsInOctets Counter64, curStatsInPkts Counter64, curStatsInBroadcastPkts Counter64, curStatsInMulticastPkts Counter64, curStatsInPkts64Octets Counter64, curStatsInPkts65to127Octets Counter64, curStatsInPkts128to255Octets Counter64, curStatsInPkts256to511Octets Counter64, curStatsInPkts512to1023Octets Counter64, curStatsInPkts1024to1518Octets Counter64, curStatsInPkts1519to1522Octets Counter64, curStatsInUndersizePkts Counter64, curStatsInOversizePkts Counter64, curStatsInFragments Counter64, curStatsInMpcpFrames Counter64, curStatsInMpcpOctets Counter64, curStatsInOAMFrames Counter64, curStatsInOAMOctets Counter64, curStatsInCRCErrorPkts Counter64, curStatsInDropEvents Counter64, curStatsInJabbers Counter64, curStatsInCollision Counter64, curStatsOutOctets Counter64, curStatsOutPkts Counter64, curStatsOutBroadcastPkts Counter64, curStatsOutMulticastPkts Counter64, curStatsOutPkts64Octets Counter64, curStatsOutPkts65to127Octets Counter64, curStatsOutPkts128to255Octets Counter64, curStatsOutPkts256to511Octets Counter64, curStatsOutPkts512to1023Octets Counter64, curStatsOutPkts1024to1518Octets Counter64, curStatsOutPkts1519o1522Octets Counter64, curStatsOutUndersizePkts Counter64, curStatsOutOversizePkts Counter64, curStatsOutFragments Counter64, curStatsOutMpcpFrames Counter64, curStatsOutMpcpOctets Counter64, curStatsOutOAMFrames Counter64, curStatsOutOAMOctets Counter64, curStatsOutCRCErrorPkts Counter64, curStatsOutDropEvents Counter64, curStatsOutJabbers Counter64, curStatsOutCollision Counter64, curStatsStatusAndAction INTEGER } curStatsDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引号 For OLT Agent, set to corresponding device/slot/port For ONU Agent, set to 0" ::= { curStatsEntry 1 } curStatsCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding slot " ::= { curStatsEntry 2 } curStatsPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "端口索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding port " ::= { curStatsEntry 3 } curStatsInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收字节数" ::= { curStatsEntry 4 } curStatsInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收帧数" ::= { curStatsEntry 5 } curStatsInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收广播帧数" ::= { curStatsEntry 6 } curStatsInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收组播帧数" ::= { curStatsEntry 7 } curStatsInPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收64字节包数" ::= { curStatsEntry 8 } curStatsInPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收65～127字节包数" ::= { curStatsEntry 9 } curStatsInPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收128～255字节包数" ::= { curStatsEntry 10 } curStatsInPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收256～511字节包数" ::= { curStatsEntry 11 } curStatsInPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收512～1023字节包数" ::= { curStatsEntry 12 } curStatsInPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收1024～1518字节包数" ::= { curStatsEntry 13 } curStatsInPkts1519to1522Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收1519～1522字节包数" ::= { curStatsEntry 14 } curStatsInUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超短帧数" ::= { curStatsEntry 15 } curStatsInOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超长帧数" ::= { curStatsEntry 16 } curStatsInFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收碎片数" ::= { curStatsEntry 17 } curStatsInMpcpFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收MPCP帧数" ::= { curStatsEntry 18 } curStatsInMpcpOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收MPCP字节数" ::= { curStatsEntry 19 } curStatsInOAMFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收OAM帧数" ::= { curStatsEntry 20 } curStatsInOAMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收OAM字节数" ::= { curStatsEntry 21 } curStatsInCRCErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收CRC错误帧" ::= { curStatsEntry 22 } curStatsInDropEvents OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收丢包事件次数" ::= { curStatsEntry 23 } curStatsInJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超长错帧数" ::= { curStatsEntry 24 } curStatsInCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收碰撞帧数" ::= { curStatsEntry 25 } curStatsOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送字节数" ::= { curStatsEntry 26 } curStatsOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送帧数" ::= { curStatsEntry 27 } curStatsOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送广播帧数" ::= { curStatsEntry 28 } curStatsOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送组播帧数" ::= { curStatsEntry 29 } curStatsOutPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送64字节包数" ::= { curStatsEntry 30 } curStatsOutPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送65～127字节包数" ::= { curStatsEntry 31 } curStatsOutPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送128～255字节包数" ::= { curStatsEntry 32 } curStatsOutPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送256～511字节包数" ::= { curStatsEntry 33 } curStatsOutPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送512～1023字节包数" ::= { curStatsEntry 34 } curStatsOutPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送1024～1518字节包数" ::= { curStatsEntry 35 } curStatsOutPkts1519o1522Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送1519～1522字节包数" ::= { curStatsEntry 36 } curStatsOutUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超短帧数" ::= { curStatsEntry 37 } curStatsOutOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超长帧数" ::= { curStatsEntry 38 } curStatsOutFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送碎片数" ::= { curStatsEntry 39 } curStatsOutMpcpFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送MPCP帧数" ::= { curStatsEntry 40 } curStatsOutMpcpOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送MPCP字节数" ::= { curStatsEntry 41 } curStatsOutOAMFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送OAM帧数" ::= { curStatsEntry 42 } curStatsOutOAMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送OAM字节数" ::= { curStatsEntry 43 } curStatsOutCRCErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送CRC错误帧" ::= { curStatsEntry 44 } curStatsOutDropEvents OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送丢包事件次数" ::= { curStatsEntry 45 } curStatsOutJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超长错帧数" ::= { curStatsEntry 46 } curStatsOutCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送碰撞帧数" ::= { curStatsEntry 47 } curStatsStatusAndAction OBJECT-TYPE SYNTAX INTEGER { none(1), clean(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "当前统计状态及操作 clean(2) 统计量清零" ::= { curStatsEntry 48 } stats15Table OBJECT-TYPE SYNTAX SEQUENCE OF Stats15Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes performance data" ::= { performanceStatisticObjects 2 } stats15Entry OBJECT-TYPE SYNTAX Stats15Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { stats15DeviceIndex, stats15CardIndex, stats15PortIndex, stats15Index } ::= { stats15Table 1 } Stats15Entry ::= SEQUENCE { stats15DeviceIndex EponDeviceIndex, stats15CardIndex EponCardIndex, stats15PortIndex EponPortIndex, stats15Index EponStats15MinRecordType, stats15InOctets Counter64, stats15InPkts Counter64, stats15InBroadcastPkts Counter64, stats15InMulticastPkts Counter64, stats15InPkts64Octets Counter64, stats15InPkts65to127Octets Counter64, stats15InPkts128to255Octets Counter64, stats15InPkts256to511Octets Counter64, stats15InPkts512to1023Octets Counter64, stats15InPkts1024to1518Octets Counter64, stats15InPkts1519to1522Octets Counter64, stats15InUndersizePkts Counter64, stats15InOversizePkts Counter64, stats15InFragments Counter64, stats15InMpcpFrames Counter64, stats15InMpcpOctets Counter64, stats15InOAMFrames Counter64, stats15InOAMOctets Counter64, stats15InCRCErrorPkts Counter64, stats15InDropEvents Counter64, stats15InJabbers Counter64, stats15InCollision Counter64, stats15OutOctets Counter64, stats15OutPkts Counter64, stats15OutBroadcastPkts Counter64, stats15OutMulticastPkts Counter64, stats15OutPkts64Octets Counter64, stats15OutPkts65to127Octets Counter64, stats15OutPkts128to255Octets Counter64, stats15OutPkts256to511Octets Counter64, stats15OutPkts512to1023Octets Counter64, stats15OutPkts1024to1518Octets Counter64, stats15OutPkts1519o1522Octets Counter64, stats15OutUndersizePkts Counter64, stats15OutOversizePkts Counter64, stats15OutFragments Counter64, stats15OutMpcpFrames Counter64, stats15OutMpcpOctets Counter64, stats15OutOAMFrames Counter64, stats15OutOAMOctets Counter64, stats15OutCRCErrorPkts Counter64, stats15OutDropEvents Counter64, stats15OutJabbers Counter64, stats15OutCollision Counter64, stats15StatusAndAction INTEGER, stats15ValidityTag TruthValue, stats15ElapsedTime Counter32, stats15EndTime DateAndTime } stats15DeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引号 For OLT Agent, set to corresponding device/slot/port For ONU Agent, set to 0 " ::= { stats15Entry 1 } stats15CardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding slot " ::= { stats15Entry 2 } stats15PortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "端口索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding port " ::= { stats15Entry 3 } stats15Index OBJECT-TYPE SYNTAX EponStats15MinRecordType MAX-ACCESS not-accessible STATUS current DESCRIPTION " 顺序索引号 " ::= { stats15Entry 4 } stats15InOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收字节数" ::= { stats15Entry 5 } stats15InPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收帧数" ::= { stats15Entry 6 } stats15InBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收广播帧数" ::= { stats15Entry 7 } stats15InMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收组播帧数" ::= { stats15Entry 8 } stats15InPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收64字节包数" ::= { stats15Entry 9 } stats15InPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收65～127字节包数" ::= { stats15Entry 10 } stats15InPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收128～255字节包数" ::= { stats15Entry 11 } stats15InPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收256～511字节包数" ::= { stats15Entry 12 } stats15InPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收512～1023字节包数" ::= { stats15Entry 13 } stats15InPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收1024～1518字节包数" ::= { stats15Entry 14 } stats15InPkts1519to1522Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收1519～1522字节包数" ::= { stats15Entry 15 } stats15InUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超短帧数" ::= { stats15Entry 16 } stats15InOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超长帧数" ::= { stats15Entry 17 } stats15InFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收碎片数" ::= { stats15Entry 18 } stats15InMpcpFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收MPCP帧数" ::= { stats15Entry 19 } stats15InMpcpOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收MPCP字节数" ::= { stats15Entry 20 } stats15InOAMFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收OAM帧数" ::= { stats15Entry 21 } stats15InOAMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收OAM字节数" ::= { stats15Entry 22 } stats15InCRCErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收CRC错误帧" ::= { stats15Entry 23 } stats15InDropEvents OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收丢包事件次数" ::= { stats15Entry 24 } stats15InJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超长错帧数" ::= { stats15Entry 25 } stats15InCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收碰撞帧数" ::= { stats15Entry 26 } stats15OutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送字节数" ::= { stats15Entry 27 } stats15OutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送帧数" ::= { stats15Entry 28 } stats15OutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送广播帧数" ::= { stats15Entry 29 } stats15OutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送组播帧数" ::= { stats15Entry 30 } stats15OutPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送64字节包数" ::= { stats15Entry 31 } stats15OutPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送65～127字节包数" ::= { stats15Entry 32 } stats15OutPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送128～255字节包数" ::= { stats15Entry 33 } stats15OutPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送256～511字节包数" ::= { stats15Entry 34 } stats15OutPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送512～1023字节包数" ::= { stats15Entry 35 } stats15OutPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送1024～1518字节包数" ::= { stats15Entry 36 } stats15OutPkts1519o1522Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送1519～1522字节包数" ::= { stats15Entry 37 } stats15OutUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超短帧数" ::= { stats15Entry 38 } stats15OutOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超长帧数" ::= { stats15Entry 39 } stats15OutFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送碎片数" ::= { stats15Entry 40 } stats15OutMpcpFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送MPCP帧数" ::= { stats15Entry 41 } stats15OutMpcpOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送MPCP字节数" ::= { stats15Entry 42 } stats15OutOAMFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送OAM帧数" ::= { stats15Entry 43 } stats15OutOAMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送OAM字节数" ::= { stats15Entry 44 } stats15OutCRCErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送CRC错误帧" ::= { stats15Entry 45 } stats15OutDropEvents OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送丢包事件次数" ::= { stats15Entry 46 } stats15OutJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超长错帧数" ::= { stats15Entry 47 } stats15OutCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送碰撞帧数" ::= { stats15Entry 48 } stats15StatusAndAction OBJECT-TYPE SYNTAX INTEGER { none(1), clean(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "当前统计状态及操作 clean(2) 统计量清零" ::= { stats15Entry 49 } stats15ValidityTag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the current 15-min PM data is valid" ::= { stats15Entry 50 } stats15ElapsedTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " It is elapsed time, since start of this 15-min interval. It is only valid for current PM data. For history PM data, set to 0. " ::= { stats15Entry 51 } stats15EndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " It is time, when the PM history data is created. It is only valid for history PM data. " ::= { stats15Entry 52 } stats24Table OBJECT-TYPE SYNTAX SEQUENCE OF Stats24Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "1-day performance data" ::= { performanceStatisticObjects 3 } stats24Entry OBJECT-TYPE SYNTAX Stats24Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { stats24DeviceIndex, stats24CardIndex, stats24PortIndex, stats24Index } ::= { stats24Table 1 } Stats24Entry ::= SEQUENCE { stats24DeviceIndex EponDeviceIndex, stats24CardIndex EponCardIndex, stats24PortIndex EponPortIndex, stats24Index EponStats24HourRecordType, stats24InOctets Counter64, stats24InPkts Counter64, stats24InBroadcastPkts Counter64, stats24InMulticastPkts Counter64, stats24InPkts64Octets Counter64, stats24InPkts65to127Octets Counter64, stats24InPkts128to255Octets Counter64, stats24InPkts256to511Octets Counter64, stats24InPkts512to1023Octets Counter64, stats24InPkts1024to1518Octets Counter64, stats24InPkts1519to1522Octets Counter64, stats24InUndersizePkts Counter64, stats24InOversizePkts Counter64, stats24InFragments Counter64, stats24InMpcpFrames Counter64, stats24InMpcpOctets Counter64, stats24InOAMFrames Counter64, stats24InOAMOctets Counter64, stats24InCRCErrorPkts Counter64, stats24InDropEvents Counter64, stats24InJabbers Counter64, stats24InCollision Counter64, stats24OutOctets Counter64, stats24OutPkts Counter64, stats24OutBroadcastPkts Counter64, stats24OutMulticastPkts Counter64, stats24OutPkts64Octets Counter64, stats24OutPkts65to127Octets Counter64, stats24OutPkts128to255Octets Counter64, stats24OutPkts256to511Octets Counter64, stats24OutPkts512to1023Octets Counter64, stats24OutPkts1024to1518Octets Counter64, stats24OutPkts1519o1522Octets Counter64, stats24OutUndersizePkts Counter64, stats24OutOversizePkts Counter64, stats24OutFragments Counter64, stats24OutMpcpFrames Counter64, stats24OutMpcpOctets Counter64, stats24OutOAMFrames Counter64, stats24OutOAMOctets Counter64, stats24OutCRCErrorPkts Counter64, stats24OutDropEvents Counter64, stats24OutJabbers Counter64, stats24OutCollision Counter64, stats24StatusAndAction INTEGER, stats24ValidityTag TruthValue, stats24ElapsedTime Counter32, stats24EndTime DateAndTime } stats24DeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引号 For OLT Agent, set to corresponding device/slot/port For ONU Agent, set to 0 " ::= { stats24Entry 1 } stats24CardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding slot " ::= { stats24Entry 2 } stats24PortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "端口索引号 For OLT Agent, set to 0 For ONU Agent, set to corresponding port " ::= { stats24Entry 3 } stats24Index OBJECT-TYPE SYNTAX EponStats24HourRecordType MAX-ACCESS not-accessible STATUS current DESCRIPTION "顺序索引号" ::= { stats24Entry 4 } stats24InOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收字节数" ::= { stats24Entry 5 } stats24InPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收帧数" ::= { stats24Entry 6 } stats24InBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收广播帧数" ::= { stats24Entry 7 } stats24InMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收组播帧数" ::= { stats24Entry 8 } stats24InPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收64字节包数" ::= { stats24Entry 9 } stats24InPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收65～127字节包数" ::= { stats24Entry 10 } stats24InPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收128～255字节包数" ::= { stats24Entry 11 } stats24InPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收256～511字节包数" ::= { stats24Entry 12 } stats24InPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收512～1023字节包数" ::= { stats24Entry 13 } stats24InPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收1024～1518字节包数" ::= { stats24Entry 14 } stats24InPkts1519to1522Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收1519～1522字节包数" ::= { stats24Entry 15 } stats24InUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超短帧数" ::= { stats24Entry 16 } stats24InOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超长帧数" ::= { stats24Entry 17 } stats24InFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收碎片数" ::= { stats24Entry 18 } stats24InMpcpFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收MPCP帧数" ::= { stats24Entry 19 } stats24InMpcpOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收MPCP字节数" ::= { stats24Entry 20 } stats24InOAMFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收OAM帧数" ::= { stats24Entry 21 } stats24InOAMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收OAM字节数" ::= { stats24Entry 22 } stats24InCRCErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收CRC错误帧" ::= { stats24Entry 23 } stats24InDropEvents OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收丢包事件次数" ::= { stats24Entry 24 } stats24InJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收超长错帧数" ::= { stats24Entry 25 } stats24InCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "接收碰撞帧数" ::= { stats24Entry 26 } stats24OutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送字节数" ::= { stats24Entry 27 } stats24OutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送帧数" ::= { stats24Entry 28 } stats24OutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送广播帧数" ::= { stats24Entry 29 } stats24OutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送组播帧数" ::= { stats24Entry 30 } stats24OutPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送64字节包数" ::= { stats24Entry 31 } stats24OutPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送65～127字节包数" ::= { stats24Entry 32 } stats24OutPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送128～255字节包数" ::= { stats24Entry 33 } stats24OutPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送256～511字节包数" ::= { stats24Entry 34 } stats24OutPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送512～1023字节包数" ::= { stats24Entry 35 } stats24OutPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送1024～1518字节包数" ::= { stats24Entry 36 } stats24OutPkts1519o1522Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送1519～1522字节包数" ::= { stats24Entry 37 } stats24OutUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超短帧数" ::= { stats24Entry 38 } stats24OutOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超长帧数" ::= { stats24Entry 39 } stats24OutFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送碎片数" ::= { stats24Entry 40 } stats24OutMpcpFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送MPCP帧数" ::= { stats24Entry 41 } stats24OutMpcpOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送MPCP字节数" ::= { stats24Entry 42 } stats24OutOAMFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送OAM帧数" ::= { stats24Entry 43 } stats24OutOAMOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送OAM字节数" ::= { stats24Entry 44 } stats24OutCRCErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送CRC错误帧" ::= { stats24Entry 45 } stats24OutDropEvents OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送丢包事件次数" ::= { stats24Entry 46 } stats24OutJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送超长错帧数" ::= { stats24Entry 47 } stats24OutCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "发送碰撞帧数" ::= { stats24Entry 48 } stats24StatusAndAction OBJECT-TYPE SYNTAX INTEGER { none(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "当前统计状态及操作 clear(2) 统计量清零" ::= { stats24Entry 49 } stats24ValidityTag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the current 1-day PM data is valid" ::= { stats24Entry 50 } stats24ElapsedTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " It is elapsed time, since start of this 1-day interval. It is only valid for current PM data. For history PM data, set to 0. " ::= { stats24Entry 51 } stats24EndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " It is time, when the PM history data is created. It is only valid for history PM data. " ::= { stats24Entry 52 } perfStatsGlobalSet OBJECT-IDENTITY STATUS current DESCRIPTION "" ::= { performanceStatisticObjects 4 } perfStats15MinMaxRecord OBJECT-TYPE SYNTAX EponStats15MinRecordType MAX-ACCESS read-write STATUS current DESCRIPTION "15分钟性能统计的最大记录数, 不能是0" DEFVAL { 96 } ::= { perfStatsGlobalSet 1 } perfStats24HourMaxRecord OBJECT-TYPE SYNTAX EponStats24HourRecordType MAX-ACCESS read-write STATUS current DESCRIPTION "24小时性能统计的最大记录数, 不能是0" DEFVAL { 7 } ::= { perfStatsGlobalSet 2 } perfStatsThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF PerfStatsThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "门限管理" ::= { performanceStatisticObjects 5 } perfStatsThresholdEntry OBJECT-TYPE SYNTAX PerfStatsThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "门限管理" INDEX { perfStatsThresholdDeviceIndex, perfStatsThresholdCardIndex, perfStatsThresholdPortIndex, perfStatsThresholdTypeIndex } ::= { perfStatsThresholdTable 1 } PerfStatsThresholdEntry ::= SEQUENCE { perfStatsThresholdDeviceIndex EponDeviceIndex, perfStatsThresholdCardIndex EponCardIndex, perfStatsThresholdPortIndex EponPortIndex, perfStatsThresholdTypeIndex EponStatsThresholdType, perfStatsThresholdUpper Counter64, perfStatsThresholdLower Counter64, perfStatsThresholdRowStatus RowStatus } perfStatsThresholdDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引号 定义同curStatsDeviceIndex" ::= { perfStatsThresholdEntry 1 } perfStatsThresholdCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引号 定义同curStatsCardIndex" ::= { perfStatsThresholdEntry 2 } perfStatsThresholdPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "端口索引号 定义同curStatsPortIndex" ::= { perfStatsThresholdEntry 3 } perfStatsThresholdTypeIndex OBJECT-TYPE SYNTAX EponStatsThresholdType MAX-ACCESS not-accessible STATUS current DESCRIPTION "门限类型" ::= { perfStatsThresholdEntry 4 } perfStatsThresholdUpper OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-create STATUS current DESCRIPTION "阈值上限" ::= { perfStatsThresholdEntry 5 } perfStatsThresholdLower OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-create STATUS current DESCRIPTION "阈值下限" ::= { perfStatsThresholdEntry 6 } perfStatsThresholdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "行状态(添加、删除、修改)" ::= { perfStatsThresholdEntry 7 } -------------------------------------------------------------------------------- -- AlarmManagementObjects[告警管理项](1.3.6.1.4.1.17409.2.2.11) -------------------------------------------------------------------------------- eponNotifications OBJECT IDENTIFIER ::= { eponTrapObjectGroup 1 } eponAlarmNotification NOTIFICATION-TYPE OBJECTS { eponTrapSequenceNumber, eponTrapOccurTime, eponTrapCode, eponTrapInstance, eponTrapSeverity, eponTrapCorrelationId, eponTrapAdditionalText } STATUS current DESCRIPTION "Alarm TRAP definition" ::= { eponNotifications 1 } eponEventNotification NOTIFICATION-TYPE OBJECTS { eponTrapSequenceNumber, eponTrapOccurTime, eponTrapCode, eponTrapInstance, eponTrapAdditionalText } STATUS current DESCRIPTION "Event TRAP definition" ::= { eponNotifications 2 } eponTrapObjects OBJECT IDENTIFIER ::= { eponTrapObjectGroup 2 } -- trap信息上报的oid顺序7641523 eponTrapInstance OBJECT-TYPE SYNTAX EponAlarmInstance MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Alarm instance, indicates the detailed managed object, which detects faults. " ::= { eponTrapObjects 1 } eponTrapCorrelationId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique sequence number for the alarm to be cleared, for alarm clearing. Set to 0 for alarm reporting" ::= { eponTrapObjects 2 } eponTrapAdditionalText OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (0..256) ) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table" ::= { eponTrapObjects 3 } eponTrapCode OBJECT-TYPE SYNTAX EponAlarmCode MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " 告警代码,见附录A.3" ::= { eponTrapObjects 4 } eponTrapSeverity OBJECT-TYPE SYNTAX EponSeverityType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " 告警严重程度。" ::= { eponTrapObjects 5 } eponTrapOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " 告警产生时间。" ::= { eponTrapObjects 6 } eponTrapSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " A unique sequence number for each trap generated by node. The sequence number shall be reset to 1 when node restarts. The alarm sequence number shall be independent of the event sequence number. Each shall be self-governed. -------------------------------------------------------------------------------- The sequence ID of alarm shall be assigned from the order of transmitting trap to the NMS, instead of the order of alarm occurance. Therefore the NMS will receive the continuous sequence ID. 1. When device is in active/standby mode, sequence ID shall be synchronized between active and standby control module. 2. When control module switchover takes place, the current sequence ID shall keep the synchronized value. 3. When device restarts, sequence ID shall start from 1. 4. It shall be increased per alarm trap including both alarm raising and clear. 5. Non-zero value shall be used. When reaches the maximum number, it shall roll back to 1. -------------------------------------------------------------------------------- The sequence ID of event shall be assigned from the order of transmitting trap to the NMS. Therefore the NMS will receive the continuous sequence ID. 1. When device is in active/standby mode, sequence ID shall be synchronized between active and standby control module. 2. When control module switchover takes place, the current sequence ID shall keep the synchronized value. 3. When device restarts, sequence ID shall start from 1. 4. It shall be increased per event trap. 5. Non-zero value shall be used. When reaches the maximum number, it shall roll back to 1. " ::= { eponTrapObjects 7 } activeAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Active alarm table The device shall maintain this table, to maintain all outstanding (not cleared) alarms generated by the device, including: 1. Not hit device local alarm filter. That means had been reported to trap receiver (NMS or EMS) 2. Hit local alarm filter. That means not trap is reported to trap receiver for the alarm. The device shall maintain two numbers: 1. Alarm sequence number: As described in eponTrapSequenceNumber, it is initially set to 1 when device restarts, increases per trap reported to trap receiver, and rollover to 1 once it reaches the maximum value. From NMS's view, traps received from a nodes will be consecutive, by identifying the alarm sequence number carried in alarm trap. If breaks, means some trap may be lost, since packet loss between NMS and NE. 2. Alarm raising number: This is maintained by NE internally and does not intend for being acknowledged by external manage system. It is designed to uniquely indentify each alarm raised by NE, excluding duplicates. Once one alarm raised, despite whether it is hit by alarm filter, NE shall assign a raising number to it. So, it major functionality is to uniquely identify alarms hit NE local alarm filter, since this kindly alarm will not be reported to NMS, and hence no alarm sequence number is assigned to it. It is initially set to 1 when device restarts, increases per alarm generation ( excluding duplicates), and rollover to 1 once it reaches the maximum value. FUNCTION DESCRIPTION OF ACTIVE ALARM TABLE: ALARM RAISING ---------------------- 1. When NE detects one fault and associates to one kind of alarm, it shall check whether there is same alarm in active alarm table, which is indexed by alarm code and alarm instance. If hits, it means duplicates, update the corresponding entry of the table. Otherwise, 2. The alarm is not a duplicate. Assign an alarm raising number. Check whether the alarm hits local alarm filters. If hits, set alarm sequence number to 0. Create an entry into active alarm table. Otherwise, 3. Assign an alarm sequence number to the alarm. Create an entry into active alarm table. Report the alarm trap to all trap receivers. ALARM CLEARING ---------------------- 1. When NE detects one fault is cleared and associates to one kind of alarm, it shall check whether there is corresponding alarm in active alarm table, which is indexed by alarm code and alarm instance. If no hit, escape this clear event. Upon a hit, if the alarm sequence number is 0, move the active alarm entry to history alarm table and update the corresponding fields. At this case, historyAlarmCorrelationId and historyAlarmSeqNum will be set to 0. Otherwise, 2. Assign an alarm sequence number to the clear trap. Report the alarm clear trap to all trap receivers. Move the active alarm entry to history alarm table and update the corresponding fields. At this case, activeAlarmSeqNum shall be copied to historyAlarmCorrelationId, and historyAlarmSeqNum shall be set to the new alarm sequence number for the clear trap. ALARM SYNCHRONIZATION BETWEEN NE AND NMS --------------------------------------------- 1. Once NMS finds the alarm sequence number in reported alarm traps is not continuous, it will walk active or history alarm table of the NE for the lost seuqence number. " ::= { eponAlarmObjGroup 1 } activeAlarmEntry OBJECT-TYPE SYNTAX ActiveAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { activeAlarmSeqNum, activeAlarmRaisingNumber } ::= { activeAlarmTable 1 } ActiveAlarmEntry ::= SEQUENCE { activeAlarmSeqNum Unsigned32, activeAlarmCode EponAlarmCode, activeAlarmInstance EponAlarmInstance, activeAlarmSeverity EponSeverityType, activeAlarmRaisingNumber Unsigned32, activeAlarmFirstOccurTime DateAndTime, activeAlarmLastOccurTime DateAndTime, activeAlarmRepeats Counter32, activeAlarmConfirm TruthValue, activeAlarmAdditionalText OCTET STRING } activeAlarmSeqNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm sequence number The definition refered to the description of activeAlarmTable" ::= { activeAlarmEntry 1 } activeAlarmCode OBJECT-TYPE SYNTAX EponAlarmCode MAX-ACCESS read-only STATUS current DESCRIPTION " 告警代码,见附录A.3 " ::= { activeAlarmEntry 2 } activeAlarmInstance OBJECT-TYPE SYNTAX EponAlarmInstance MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm instance, indicates the detailed managed object" ::= { activeAlarmEntry 3 } activeAlarmSeverity OBJECT-TYPE SYNTAX EponSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION " 告警严重程度。" ::= { activeAlarmEntry 4 } activeAlarmRaisingNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm raising number. The definition refered to the description of activeAlarmTable" ::= { activeAlarmEntry 5 } activeAlarmFirstOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " 告警初始发生的时间 The time stamp when alarm occurs, which triggered to create the active alarm entry." ::= { activeAlarmEntry 6 } activeAlarmLastOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp when alarm occurs, where the alarm is duplicated with existed active alarm entry, and it was the latest one. " ::= { activeAlarmEntry 7 } activeAlarmRepeats OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of repeated alarms for this active alarm entry" ::= { activeAlarmEntry 8 } activeAlarmConfirm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 告警确认 Node shall not clear an active alarm, upon the confirmation of the active alarm, but just mark an acknowledged status. An alarm will only be cleared once the clear condition hits." ::= { activeAlarmEntry 9 } activeAlarmAdditionalText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table" ::= { activeAlarmEntry 10 } historyAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HistoryAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "History alarm table. The device shall maintain this table, to maintain all cleared alarms generated by the device, including: 1. Not hit device local alarm filter. That means had been reported to trap receiver (NMS or EMS) 2. Hit local alarm filter. That means not trap is reported to trap receiver for the alarm. The number of history alarm enteries in the table could be device-specific. However, it is recommended no less than 200 entries. The detailed function definition refers to that given in description of activeAlarmTable. " ::= { eponAlarmObjGroup 2 } historyAlarmEntry OBJECT-TYPE SYNTAX HistoryAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { historyAlarmSeqNum, historyAlarmRaisingNumber } ::= { historyAlarmTable 1 } HistoryAlarmEntry ::= SEQUENCE { historyAlarmSeqNum Unsigned32, historyAlarmCode EponAlarmCode, historyAlarmInstance EponAlarmInstance, historyAlarmSeverity EponSeverityType, historyAlarmRaisingNumber Unsigned32, historyAlarmFirstOccurTime DateAndTime, historyAlarmLastOccurTime DateAndTime, historyAlarmRepeats Counter32, historyAlarmCorrelationId Unsigned32, historyAlarmAdditionalText OCTET STRING, historyAlarmClearTime DateAndTime } historyAlarmSeqNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm sequence number The definition refered to the description of historyAlarmTable" ::= { historyAlarmEntry 1 } historyAlarmCode OBJECT-TYPE SYNTAX EponAlarmCode MAX-ACCESS read-only STATUS current DESCRIPTION " 告警代码,见附录A.3 " ::= { historyAlarmEntry 2 } historyAlarmInstance OBJECT-TYPE SYNTAX EponAlarmInstance MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm instance, indicates the detailed managed object" ::= { historyAlarmEntry 3 } historyAlarmSeverity OBJECT-TYPE SYNTAX EponSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION " 告警严重程度。" ::= { historyAlarmEntry 4 } historyAlarmRaisingNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm raising number. The definition refered to the description of historyAlarmTable" ::= { historyAlarmEntry 5 } historyAlarmFirstOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " 告警初始发生的时间 The time stamp when alarm occurs, which triggered to create the history alarm entry." ::= { historyAlarmEntry 6 } historyAlarmLastOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp when alarm occurs, where the alarm is duplicated with existed history alarm entry, and it was the latest one. " ::= { historyAlarmEntry 7 } historyAlarmRepeats OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of repeated alarms for this history alarm entry" ::= { historyAlarmEntry 8 } historyAlarmCorrelationId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is the corresponding sequence ID of the alarm that to be cleared. " ::= { historyAlarmEntry 9 } historyAlarmAdditionalText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table" ::= { historyAlarmEntry 10 } historyAlarmClearTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Define when the alarm was cleared" ::= { historyAlarmEntry 11 } eventLogTable OBJECT-TYPE SYNTAX SEQUENCE OF EventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event log table. The device shall maintain this table, to maintain all events had be reported by the device, including: 1. The event table shall be saved in RAM memory and shall be flushed when OLT restarts. 2. The event log table shall support no less than 200 entries. When the event log table is full, the oldest entry in the table shall be removed first. 3. When OLT is configured with control module redundancy, active controller shall automatically synchronize the events in event log table b/w active and standby. " ::= { eponAlarmObjGroup 3 } eventLogEntry OBJECT-TYPE SYNTAX EventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { eventSeqNum } ::= { eventLogTable 1 } EventLogEntry ::= SEQUENCE { eventSeqNum Unsigned32, eventCode EponAlarmCode, eventInstance EponAlarmInstance, eventOccurTime DateAndTime, eventAdditionalText OCTET STRING, } eventSeqNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event sequence number The definition refered to the description of eponTrapSequenceNumber" ::= { eventLogEntry 1 } eventCode OBJECT-TYPE SYNTAX EponAlarmCode MAX-ACCESS read-only STATUS current DESCRIPTION " 事件代码,见附录A.3 " ::= { eventLogEntry 2 } eventInstance OBJECT-TYPE SYNTAX EponAlarmInstance MAX-ACCESS read-only STATUS current DESCRIPTION "Event instance, indicates the detailed managed object" ::= { eventLogEntry 3 } eventOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp when event occurs" ::= { eventLogEntry 4 } eventAdditionalText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Additional info to the event, for further desciption of the event. The format of it shall be related to each kind event defined in event reference table" ::= { eventLogEntry 5 } eponManagementAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF EponManagementAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of transport addresses to be used in the generation of SNMP messages." ::= { eponManagementObjGroup 1 } eponManagementAddrEntry OBJECT-TYPE SYNTAX EponManagementAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A transport address to be used in the generation of SNMP operations. Entries in the snmpTargetAddrTable are created and deleted using the snmpTargetAddrRowStatus object." INDEX { eponManagementAddrName } ::= { eponManagementAddrTable 1 } EponManagementAddrEntry ::= SEQUENCE { eponManagementAddrName OCTET STRING, eponManagementAddrTAddress TAddress, eponManagementAddrCommunity OCTET STRING, eponManagementAddrRowStatus RowStatus } eponManagementAddrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " 网管节点的名字" ::= { eponManagementAddrEntry 1 } eponManagementAddrTAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 网管节点的传输层地址和TRAP UDP端口号。" ::= { eponManagementAddrEntry 2 } eponManagementAddrCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64) ) MAX-ACCESS read-create STATUS current DESCRIPTION " 发送TRAP的Community。" ::= { eponManagementAddrEntry 3 } eponManagementAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 增加删除一个EPON管理地址。" ::= { eponManagementAddrEntry 4 } -------------------------------------------------------------------------------- -- catvOrObjects [catv光接收机属性管理项](1.3.6.1.4.1.17409.2.5.1) -------------------------------------------------------------------------------- onuCatvOrConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuCatvOrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuCatvOrConfigTable entries. " ::= {catvOrObjects 1 } onuCatvOrConfigEntry OBJECT-TYPE SYNTAX OnuCatvOrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuCatvOrConfigEntry Information" INDEX { onuCatvOrConfigDeviceIndex } ::={onuCatvOrConfigTable 1 } OnuCatvOrConfigEntry ::= SEQUENCE { onuCatvOrConfigDeviceIndex INTEGER, onuCatvOrConfigSwitch INTEGER, onuCatvOrConfigGainControlType INTEGER, onuCatvOrConfigAGCUpValue INTEGER, onuCatvOrConfigAGCRange INTEGER, onuCatvOrConfigMGCTxAttenuation INTEGER, onuCatvOrConfigInputLO INTEGER, onuCatvOrConfigInputHI INTEGER, onuCatvOrConfigOutputLO INTEGER, onuCatvOrConfigOutputHI INTEGER, onuCatvOrConfigVoltageHI INTEGER, onuCatvOrConfigVoltageLO INTEGER, onuCatvOrConfigTemperatureHI INTEGER, onuCatvOrConfigTemperatureLO INTEGER } onuCatvOrConfigDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "onu Catv Opitcal receiver Index" ::= {onuCatvOrConfigEntry 1 } onuCatvOrConfigSwitch OBJECT-TYPE SYNTAX INTEGER{on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 2 } onuCatvOrConfigGainControlType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 3 } onuCatvOrConfigAGCUpValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 4 } onuCatvOrConfigAGCRange OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 5 } onuCatvOrConfigMGCTxAttenuation OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 6 } onuCatvOrConfigInputLO OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 7 } onuCatvOrConfigInputHI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 8 } onuCatvOrConfigOutputLO OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 9 } onuCatvOrConfigOutputHI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 10 } onuCatvOrConfigVoltageHI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 11 } onuCatvOrConfigVoltageLO OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 12 } onuCatvOrConfigTemperatureHI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 13 } onuCatvOrConfigTemperatureLO OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "onu Catv Opitcal receiver switch." ::= {onuCatvOrConfigEntry 14 } onuCatvOrInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuCatvOrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuCatvOrInfoTable entries. " ::= {catvOrObjects 2 } onuCatvOrInfoEntry OBJECT-TYPE SYNTAX OnuCatvOrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuCatvOrConfigEntry Information" INDEX { onuCatvOrInfoDeviceIndex } ::={onuCatvOrInfoTable 1 } OnuCatvOrInfoEntry ::= SEQUENCE { onuCatvOrInfoDeviceIndex INTEGER, onuCatvOrInfoRxPower INTEGER, onuCatvOrInfoRfOutVoltage INTEGER, onuCatvOrInfoVoltage INTEGER, onuCatvOrInfoTemperature INTEGER } onuCatvOrInfoDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "onu Catv Opitcal receiver information Index" ::= {onuCatvOrInfoEntry 1 } onuCatvOrInfoRxPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "onu Catv Opitcal receiver information rx-power." ::= {onuCatvOrInfoEntry 2 } onuCatvOrInfoRfOutVoltage OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "onu Catv Opitcal receiver information rf out voltage." ::= {onuCatvOrInfoEntry 3 } onuCatvOrInfoVoltage OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "onu Catv Opitcal receiver information voltage." ::= {onuCatvOrInfoEntry 4 } onuCatvOrInfoTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "onu Catv Opitcal receiver information temperat." ::= {onuCatvOrInfoEntry 5 } -- -- eponOnuWifiTable -- eponOnuWifiTable OBJECT-TYPE SYNTAX SEQUENCE OF EponOnuWifiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关管理表" ::= { eponOnuWifiGroup 1 } eponOnuWifiEntry OBJECT-TYPE SYNTAX EponOnuWifiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关管理表" INDEX { eponOnuWifiIndex, } ::= { eponOnuWifiTable 1 } EponOnuWifiEntry ::= SEQUENCE { eponOnuWifiIndex EponDeviceIndex, eponOnuWifiClearAllWan INTEGER, eponOnuWifiCfgRestore INTEGER, eponOnuWifiWlanEnable INTEGER, eponOnuWifiHardwareVersion OCTET STRING, eponOnuWifiSoftwareVersion OCTET STRING, eponOnuWifiChannelID INTEGER, eponOnuWifiWlanStandard OCTET STRING, eponOnuWifiChannelBandwidth INTEGER, eponOnuWifiTxPowerMode INTEGER } eponOnuWifiIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "EponDeviceIndex" ::= { eponOnuWifiEntry 1 } eponOnuWifiClearAllWan OBJECT-TYPE SYNTAX INTEGER{ clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "清除家庭网关所有WAN连接" ::= { eponOnuWifiEntry 2 } eponOnuWifiCfgRestore OBJECT-TYPE SYNTAX INTEGER{ restore(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "终端恢复出厂配置" ::= { eponOnuWifiEntry 3 } eponOnuWifiWlanEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "家庭网关WLAN使能" ::= { eponOnuWifiEntry 4 } eponOnuWifiHardwareVersion OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "硬件版本" ::= { eponOnuWifiEntry 5 } eponOnuWifiSoftwareVersion OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "软件版本" ::= { eponOnuWifiEntry 6 } eponOnuWifiChannelID OBJECT-TYPE SYNTAX INTEGER(0..13) MAX-ACCESS read-write STATUS current DESCRIPTION "无线网络工作的信道ID,0为auto（默认）,其他1～13。" ::= { eponOnuWifiEntry 7 } eponOnuWifiWlanStandard OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) MAX-ACCESS read-write STATUS current DESCRIPTION "无线网络的工作模式,使用bit位图描述， 从MSB开始 bit0-802.11b， bit1-802.11g， bit2-802.11n， 该bit=0则不支持该模式，1-支持该模式。默认为0x7" ::= { eponOnuWifiEntry 8 } eponOnuWifiChannelBandwidth OBJECT-TYPE SYNTAX INTEGER{ twenty(1), fortyMinus(2), fortyPlus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "无线数据传输时所占用的信道宽度, 1：20MHz（默认），此时信道可选择1～13； 2：40MHz-，此时信道只能选择1～9； 3：40MHz+，此时信道只能选择5～13。 " ::= { eponOnuWifiEntry 9 } eponOnuWifiTxPowerMode OBJECT-TYPE SYNTAX INTEGER{ energy(1), standard(2), noclip(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "发射功率模式功率大小：节能<标准<穿墙 1：节能（低功耗） 2：标准（默认） 3：穿墙（最大功率） " ::= { eponOnuWifiEntry 10 } -- -- 2. eponOnuWifiSsidTable -- eponOnuWifiSsidTable OBJECT-TYPE SYNTAX SEQUENCE OF EponOnuWifiSsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wifi ONU SSID management table。" ::= { eponOnuWifiGroup 2 } eponOnuWifiSsidEntry OBJECT-TYPE SYNTAX EponOnuWifiSsidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of eponOnuWifiSsidTable。" INDEX { eponOnuWifiSsidOnuIndex, eponOnuWifiSsidIndex } ::= { eponOnuWifiSsidTable 1 } EponOnuWifiSsidEntry ::= SEQUENCE { eponOnuWifiSsidOnuIndex EponDeviceIndex, eponOnuWifiSsidIndex INTEGER, eponOnuWifiSsidName OCTET STRING, eponOnuWifiSsidEncryptMode INTEGER, eponOnuWifiSsidEncryptKey OCTET STRING, eponOnuWifiSsidEnable INTEGER, eponOnuWifiSsidBroadcastEnable INTEGER, eponOnuWifiSsidMaxUser INTEGER, eponOnuWifiSsidRowStatus RowStatus } eponOnuWifiSsidOnuIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关ONU索引，该索引值应与设备表中已登记终端保持一致。" ::= { eponOnuWifiSsidEntry 1 } eponOnuWifiSsidIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关SSID索引，从1开始（1-4）。" ::= { eponOnuWifiSsidEntry 2 } eponOnuWifiSsidName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "家庭网关SSID名称。" ::= { eponOnuWifiSsidEntry 3 } eponOnuWifiSsidEncryptMode OBJECT-TYPE SYNTAX INTEGER{ none(0), wep(1), wpa(2), wpa2(3), wpa-wap2(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "无线加密模式 0：NONE 1：WEP 2：WPA 3：WPA2 4：WPA_WPA2（默认） " ::= { eponOnuWifiSsidEntry 4 } eponOnuWifiSsidEncryptKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "无线密码。" ::= { eponOnuWifiSsidEntry 5 } eponOnuWifiSsidEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "家庭网关SSID使能。" ::= { eponOnuWifiSsidEntry 6 } eponOnuWifiSsidBroadcastEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "家庭SSID广播使能。" ::= { eponOnuWifiSsidEntry 7 } eponOnuWifiSsidMaxUser OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "家庭网关SSID最大用户接入,0-128，0表示不限。" ::= { eponOnuWifiSsidEntry 8 } eponOnuWifiSsidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "家庭网关SSID行状态。 做扩展用，不作强制要求" ::= { eponOnuWifiSsidEntry 9 } -- -- 3. eponOnuWifiWanTable -- eponOnuWifiWanTable OBJECT-TYPE SYNTAX SEQUENCE OF EponOnuWifiWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wifi ONU WAN conection management table。" ::= { eponOnuWifiGroup 3 } eponOnuWifiWanEntry OBJECT-TYPE SYNTAX EponOnuWifiWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of eponOnuWifiWanTable。" INDEX { eponOnuWifiWanOnuIndex, eponOnuWifiWanIndex } ::= { eponOnuWifiWanTable 1 } EponOnuWifiWanEntry ::= SEQUENCE { eponOnuWifiWanOnuIndex EponDeviceIndex, eponOnuWifiWanIndex INTEGER, eponOnuWifiWanName OCTET STRING, eponOnuWifiWanMtu INTEGER, eponOnuWifiWanVid INTEGER, eponOnuWifiWanPrio INTEGER, eponOnuWifiWanConnectMode INTEGER, eponOnuWifiWanIpMode INTEGER, eponOnuWifiWanPppoeUser OCTET STRING, eponOnuWifiWanPppoePassword OCTET STRING, eponOnuWifiWanIpv4Addr IpAddress, eponOnuWifiWanIpv4Mask IpAddress, eponOnuWifiWanIpv4Gw IpAddress, eponOnuWifiWanIpv4DnsPrimary OCTET STRING, eponOnuWifiWanIpv4DnsSecondary OCTET STRING, eponOnuWifiWanRowStatus RowStatus } eponOnuWifiWanOnuIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关ONU索引，该索引值应与设备表中已登记终端保持一致。" ::= { eponOnuWifiWanEntry 1 } eponOnuWifiWanIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关WAN连接索引（1-8）。" ::= { eponOnuWifiWanEntry 2 } eponOnuWifiWanName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Wan连接名称索引。" ::= { eponOnuWifiWanEntry 3 } eponOnuWifiWanMtu OBJECT-TYPE SYNTAX INTEGER(64..1500) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接MTU范围（64-1500）,默认值建议为1466。" ::= { eponOnuWifiWanEntry 4 } eponOnuWifiWanVid OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接VLAN ID, (0～4094) 0表示没有VLAN。" ::= { eponOnuWifiWanEntry 5 } eponOnuWifiWanPrio OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接VLAN优先级。" ::= { eponOnuWifiWanEntry 6 } eponOnuWifiWanConnectMode OBJECT-TYPE SYNTAX INTEGER{ route(1), bridge(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "WAN连接模式。" ::= { eponOnuWifiWanEntry 7 } eponOnuWifiWanIpMode OBJECT-TYPE SYNTAX INTEGER{ dhcp(1), static(2), pppoe(3), other(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接IP分配模式。" ::= { eponOnuWifiWanEntry 8 } eponOnuWifiWanPppoeUser OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接PPPoE user。" ::= { eponOnuWifiWanEntry 9 } eponOnuWifiWanPppoePassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接PPPoE password。" ::= { eponOnuWifiWanEntry 10 } eponOnuWifiWanIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接IPv4地址。" ::= { eponOnuWifiWanEntry 11 } eponOnuWifiWanIpv4Mask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接IPv4掩码。" ::= { eponOnuWifiWanEntry 12 } eponOnuWifiWanIpv4Gw OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接IPv4网关。" ::= { eponOnuWifiWanEntry 13 } eponOnuWifiWanIpv4DnsPrimary OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接IPv4首选DNS,在static模式下使用有效。每四个字节代表一个DNS地址。 当位数为0的时候,表示没有" ::= { eponOnuWifiWanEntry 14 } eponOnuWifiWanIpv4DnsSecondary OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接IPv4备选DNS列表，在static模式下使用有效。每四个字节代表一个DNS地址，当位数为0的时候，表示没有。" ::= { eponOnuWifiWanEntry 15 } eponOnuWifiWanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "WAN连接行状态。" ::= { eponOnuWifiWanEntry 16 } -- -- eponOnuWifiDataWanTable -- eponOnuWifiDataWanTable OBJECT-TYPE SYNTAX SEQUENCE OF EponOnuWifiDataWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wifi ONU management WAN conection management table" ::= { eponOnuWifiGroup 4 } eponOnuWifiDataWanEntry OBJECT-TYPE SYNTAX EponOnuWifiDataWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of eponOnuWifiDataWanTable. " INDEX { eponOnuWifiDataWanOnuIndex, eponOnuWifiDataWanIndex } ::= { eponOnuWifiDataWanTable 1 } EponOnuWifiDataWanEntry ::= SEQUENCE { eponOnuWifiDataWanOnuIndex EponDeviceIndex, eponOnuWifiDataWanIndex INTEGER, eponOnuWifiDataWanConnectMode INTEGER, eponOnuWifiDataWanServiceType INTEGER, eponOnuWifiDataWanBindIf BITS } eponOnuWifiDataWanOnuIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关ONU索引，该索引值应与设备表中已登记终端保持一致" ::= { eponOnuWifiDataWanEntry 1 } eponOnuWifiDataWanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关WAN连接索引(1-8)" ::= { eponOnuWifiDataWanEntry 2 } eponOnuWifiDataWanConnectMode OBJECT-TYPE SYNTAX INTEGER{ route(1), bridge(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "WAN Connection Mode" ::= { eponOnuWifiDataWanEntry 3 } eponOnuWifiDataWanServiceType OBJECT-TYPE SYNTAX INTEGER{ internet(1), vod(2), voip(3), mgmt(4), tr069(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "WAN连接业务类型" ::= { eponOnuWifiDataWanEntry 4 } eponOnuWifiDataWanBindIf OBJECT-TYPE SYNTAX BITS { ssid1(0), ssid2(1), ssid3(2), ssid4(3), lan1(4), lan2(5), lan3(6), lan4(7), } MAX-ACCESS read-write STATUS current DESCRIPTION "默认为0:，SSID只支持1-4" ::= { eponOnuWifiDataWanEntry 5 } -- -- eponOnuWifiUpgradeTable -- eponOnuWifiUpgradeTable OBJECT-TYPE SYNTAX SEQUENCE OF EponOnuWifiUpgradeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wifi ONU upgrade management table" ::= { eponOnuWifiGroup 5 } eponOnuWifiUpgradeEntry OBJECT-TYPE SYNTAX EponOnuWifiUpgradeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of eponOnuWifiUpgradeTable. " INDEX { eponOnuWifiUpgradeOnuIndex } ::= { eponOnuWifiUpgradeTable 1 } EponOnuWifiUpgradeEntry ::= SEQUENCE { eponOnuWifiUpgradeOnuIndex EponDeviceIndex, eponOnuWifiUpgradeFileType INTEGER, eponOnuWifiUpgradeFileName OCTET STRING, eponOnuWifiUpgradeTransportType INTEGER, eponOnuWifiUpgradeServerIpv4Addr IpAddress, eponOnuWifiUpgradeServerPort INTEGER, eponOnuWifiUpgradeUser OCTET STRING, eponOnuWifiUpgradePassword OCTET STRING, eponOnuWifiUpgradeClearFlag INTEGER, eponOnuWifiUpgradeProceed INTEGER } eponOnuWifiUpgradeOnuIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关ONU索引，该索引值应与设备表中已登记终端保持一致" ::= { eponOnuWifiUpgradeEntry 1 } eponOnuWifiUpgradeFileType OBJECT-TYPE SYNTAX INTEGER{ image(1), config(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "升级文件类型" ::= { eponOnuWifiUpgradeEntry 2 } eponOnuWifiUpgradeFileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "升级文件名。" ::= { eponOnuWifiUpgradeEntry 3 } eponOnuWifiUpgradeTransportType OBJECT-TYPE SYNTAX INTEGER{ ftp(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "协议类型" ::= { eponOnuWifiUpgradeEntry 4 } eponOnuWifiUpgradeServerIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "升级服务器IPv4地址。" ::= { eponOnuWifiUpgradeEntry 5 } eponOnuWifiUpgradeServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "升级服务器端口号。" ::= { eponOnuWifiUpgradeEntry 6 } eponOnuWifiUpgradeUser OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "升级用户名。" ::= { eponOnuWifiUpgradeEntry 7 } eponOnuWifiUpgradePassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "升级密码。" ::= { eponOnuWifiUpgradeEntry 8 } eponOnuWifiUpgradeClearFlag OBJECT-TYPE SYNTAX INTEGER{ notclear(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "升级清除标志。 1：不清除（默认） 2：清除 " ::= { eponOnuWifiUpgradeEntry 9 } eponOnuWifiUpgradeProceed OBJECT-TYPE SYNTAX INTEGER{ downloadandupgrade(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "升级指令。" ::= { eponOnuWifiUpgradeEntry 10 } -- -- 6. eponOnuWifiWanStatusTable -- eponOnuWifiWanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF EponOnuWifiWanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wifi ONU Wan Status management table" ::= { eponOnuWifiGroup 6 } eponOnuWifiWanStatusEntry OBJECT-TYPE SYNTAX EponOnuWifiWanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关WAN状态回调表。" INDEX { eponOnuWifiWanStatusOnuIndex, eponOnuWifiWanStatusWanIndex } ::= { eponOnuWifiWanStatusTable 1 } EponOnuWifiWanStatusEntry ::= SEQUENCE { eponOnuWifiWanStatusOnuIndex EponDeviceIndex, eponOnuWifiWanStatusWanIndex INTEGER, eponOnuWifiWanStatusWanName OCTET STRING, eponOnuWifiWanStatusWanIpMode INTEGER, eponOnuWifiWanStatusConnState INTEGER, eponOnuWifiWanStatusErrCode INTEGER, eponOnuWifiWanStatusIpv4Addr IpAddress, eponOnuWifiWanStatusIpv4Mask IpAddress, eponOnuWifiWanStatusIpv4Gw IpAddress, eponOnuWifiWanStatusIpv4DnsPrimary OCTET STRING, eponOnuWifiWanStatusIpv4DnsSecondary OCTET STRING } eponOnuWifiWanStatusOnuIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关ONU索引,该索引值应与设备表中已登记终端保持一致" ::= { eponOnuWifiWanStatusEntry 1 } eponOnuWifiWanStatusWanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "家庭网关WAN连接索引" ::= { eponOnuWifiWanStatusEntry 2 } eponOnuWifiWanStatusWanName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "家庭网关WAN连接名称" ::= { eponOnuWifiWanStatusEntry 3 } eponOnuWifiWanStatusWanIpMode OBJECT-TYPE SYNTAX INTEGER{ bridge(1), dhcp(2), pppoe(3), static(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "WAN连接模式" ::= { eponOnuWifiWanStatusEntry 4 } eponOnuWifiWanStatusConnState OBJECT-TYPE SYNTAX INTEGER{ disconnect(0), connect(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "家庭网关WAN连接状态" ::= { eponOnuWifiWanStatusEntry 5 } eponOnuWifiWanStatusErrCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "家庭网关WAN连接错误码" ::= { eponOnuWifiWanStatusEntry 6 } eponOnuWifiWanStatusIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "WAN连接IPv4地址" ::= { eponOnuWifiWanStatusEntry 7 } eponOnuWifiWanStatusIpv4Mask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "WAN连接IPv4掩码" ::= { eponOnuWifiWanStatusEntry 8 } eponOnuWifiWanStatusIpv4Gw OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "WAN连接IPv4网关" ::= { eponOnuWifiWanStatusEntry 9 } eponOnuWifiWanStatusIpv4DnsPrimary OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "WAN连接IPv4首选DNS,在static模式下使用有效。每四个字节代表一个DNS地址。 当位数为0的时候,表示没有" ::= { eponOnuWifiWanStatusEntry 10 } eponOnuWifiWanStatusIpv4DnsSecondary OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "WWAN连接IPv4首选DNS,在static模式下使用有效。每四个字节代表一个DNS地址。 当位数为0的时候,表示没有" ::= { eponOnuWifiWanStatusEntry 11 } END